BVShop:Make Your Mark
2021Q3
a crumbling two-story stone tower overrun with vines, [Map Room #17], Lich# 26876, go stone tower
Make Your Mark
| [Make Your Mark -] | |
| Despite the worsening condition of the exterior of the tower, the inside is clean and neatly furnished with numerous bookshelves. The grass making its way between the cracks in the cobblestone floor has been meticulously trimmed, and the walls behind the pewter-caged lanterns providing illumination have been scrubbed clean of soot. A lacquered linden table has been carved to follow the gentle curve of the circular tower wall, its surface covered by a woven sapphire blue table runner. You also see a riveted iron door. | |
| Obvious exits: none | |
On the linden table you see: a faenor-veined zebrawood graver, an onyx-inlaid birch-handled graver, a patinated copper and teak burin, a glossy ebonwood burin, a spiral-etched yew and mithril burin, a grooved illthorn burin, a spiraling lavender paintbrush, a crimson hazelwood paintbrush, a saffron-stained paintbrush, an ivory-inlaid linden paintbrush, a silver-banded modwir paintbrush, a narrow brass-ferruled paintbrush, a dark green mesille paintbrush and an immaculately printed note.
an immaculately printed note
Burins and gravers will engrave a shape on many of the magical things you may stumble upon when hunting. Paintbrushes will put a dot of paint on them. I'm told this could be useful for wizards and their clientele. LOOK at them to see what each will engrave or paint. You may find chits to make them more versatile upon the bookshelves. They add the ability to paint in black or engrave a diamond, depending on your tool. The upstairs is STRICTLY off-limits. Don't even try. XOXO, The Proprietrix
a faenor-veined zebrawood graver Weight: <1 pound Magic Marker examineExamine:
A glyph-encircled silver disk etched with a helix is inlaid into the handle of the graver.1,000 an onyx-inlaid birch-handled graver Weight: <1 pound Magic Marker examineExamine:
A glyph-encircled silver disk etched with a chevron is inlaid into the handle of the graver.1,000 a patinated copper and teak burin Weight: <1 pound Magic Marker examineExamine:
A glyph-encircled silver disk etched with an octagon is inlaid into the handle of the burin.1,000 a glossy ebonwood burin Weight: <1 pound Magic Marker examineExamine:
A glyph-encircled silver disk etched with a pentagram is inlaid into the handle of the burin.1,000 a spiral-etched yew and mithril burin Weight: <1 pound Magic Marker examineExamine:
A glyph-encircled silver disk etched with a spiral is inlaid into the handle of the burin.1,000 a grooved illthorn burin Weight: <1 pound Magic Marker examineExamine:
A glyph-encircled silver disk etched with a pyramid is inlaid into the handle of the burin.1,000 a spiraling lavender paintbrush Weight: <1 pound Magic Marker examineExamine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with lavender paint.1,000 a crimson hazelwood paintbrush Weight: <1 pound Magic Marker examineExamine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with crimson paint.1,000 a saffron-stained paintbrush Weight: <1 pound Magic Marker examineExamine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with saffron paint.1,000 an ivory-inlaid linden paintbrush Weight: <1 pound Magic Marker examineExamine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with ivory paint.1,000 a silver-banded modwir paintbrush Weight: <1 pound Magic Marker examineExamine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with argent paint.1,000 a narrow brass-ferruled paintbrush Weight: <1 pound Magic Marker examineExamine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with cerulean paint.1,000 a dark green mesille paintbrush Weight: <1 pound Magic Marker examineExamine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with dark green paint.1,000 On the bookshelves you see: a diamond-shaped linden chit painted obsidian black.
a diamond-shaped linden chit painted obsidian black Weight: <1 pound Unlock Magic Marker to Tier 2 analyze, examineAnalyze:
Your chit is used to unlock the potential of things held in your other hand.
Your chit will unlock the second tier of a Magic Marker. For an engraver, this will add a second diamond shape option and for a paintbrush, this will add a second black paint color option. FLIP the marker to switch between the two options after you use this chit.
RAISE the chit with a Tier 1 Magic Marker in your other hand to unlock it to Tier 2.
You need only RAISE your chit while holding a compatible piece of equipment in your other hand.
Your chit may not be altered or changed in any way.
Examine:
ANALYZE me for more info. RAISE me with a Tier 1 Wizard Marker in your other hand to unlock it to Tier 2.500
2021Q1
a crumbling two-story stone tower overrun with vines, [Map Room #17], Lich#26876 , go stone tower
Make Your Mark
| [Make Your Mark -] | |
| Despite the worsening condition of the exterior of the tower, the inside is clean and neatly furnished with numerous bookshelves. The grass making its way between the cracks in the cobblestone floor has been meticulously trimmed, and the walls behind the pewter-caged lanterns providing illumination have been scrubbed clean of soot. A lacquered linden table has been carved to follow the gentle curve of the circular tower wall, its surface covered by a woven sapphire blue table runner. You also see a riveted iron door. | |
| Obvious exits: none | |
On the linden table you see: an immaculately printed note, a dark green mesille paintbrush, a narrow brass-ferruled paintbrush, a silver-banded modwir paintbrush, an ivory-inlaid linden paintbrush, a saffron-stained paintbrush, a crimson hazelwood paintbrush, a spiraling lavender paintbrush, a grooved illthorn burin, a spiral-etched yew and mithril burin, a glossy ebonwood burin, a patinated copper and teak burin, an onyx-inlaid birch-handled graver and a faenor-veined zebrawood graver.
an immaculately printed note
Burins and gravers will engrave a shape on many of the magical things you may stumble upon when hunting. Paintbrushes will put a dot of paint on them. I'm told this could be useful for wizards and their clientele. LOOK at them to see what each will engrave or paint. You may find chits to make them more versatile upon the bookshelves. They add the ability to paint in black or engrave a diamond, depending on your tool. The upstairs is STRICTLY off-limits. Don't even try. XOXO, The Proprietrix
a dark green mesille paintbrush Weight: <1 pound Magic Marker examineExamine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with dark green paint.1,000 a narrow brass-ferruled paintbrush Weight: <1 pound Magic Marker examineExamine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with cerulean paint.1,000 a silver-banded modwir paintbrush Weight: <1 pound Magic Marker examineExamine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with argent paint.1,000 an ivory-inlaid linden paintbrush Weight: <1 pound Magic Marker examineExamine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with ivory paint.1,000 a saffron-stained paintbrush Weight: <1 pound Magic Marker examineExamine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with saffron paint.1,000 a crimson hazelwood paintbrush Weight: <1 pound Magic Marker examineExamine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with crimson paint.1,000 a spiraling lavender paintbrush Weight: <1 pound Magic Marker examineExamine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with lavender paint.1,000 a grooved illthorn burin Weight: <1 pound Magic Marker examineExamine:
A glyph-encircled silver disk etched with a pyramid is inlaid into the handle of the burin.1,000 a spiral-etched yew and mithril burin Weight: <1 pound Magic Marker examineExamine:
A glyph-encircled silver disk etched with a spiral is inlaid into the handle of the burin.1,000 a glossy ebonwood burin Weight: <1 pound Magic Marker examineExamine:
A glyph-encircled silver disk etched with a pentagram is inlaid into the handle of the burin.1,000 a patinated copper and teak burin Weight: <1 pound Magic Marker examineExamine:
A glyph-encircled silver disk etched with an octagon is inlaid into the handle of the burin.1,000 an onyx-inlaid birch-handled graver Weight: <1 pound Magic Marker examineExamine:
A glyph-encircled silver disk etched with a chevron is inlaid into the handle of the graver.1,000 a faenor-veined zebrawood graver Weight: <1 pound Magic Marker examineExamine:
A glyph-encircled silver disk etched with a helix is inlaid into the handle of the graver.1,000 On the bookshelves you see: a diamond-shaped linden chit painted obsidian black.
a diamond-shaped linden chit painted obsidian black Weight: <1 pound
Your chit is used to unlock the potential of things held in your other hand.
Your chit will unlock the second tier of a Magic Marker. For an engraver, this will add a second diamond shape option and for a paintbrush, this will add a second black paint color option. FLIP the marker to switch between the two options after you use this chit.
RAISE the chit with a Tier 1 Magic Marker in your other hand to unlock it to Tier 2.
You need only RAISE your chit while holding a compatible piece of equipment in your other hand.
Your chit may not be altered or changed in any way.
Examine:
You glance at a diamond-shaped linden chit painted obsidian black.
You notice something written on it...
ANALYZE me for more info. RAISE me with a Tier 1 Wizard Marker in your other hand to unlock it to Tier 2.500
2020Q3
a crumbling two-story stone tower overrun with vines, [Map Room #17], Lich#26876 , go stone tower
Make Your Mark, First Floor
| [Make Your Mark, First Floor -] | |
| Despite the worsening condition of the exterior of the tower, the inside is clean and neatly furnished with numerous bookshelves. The grass making its way between the cracks in the cobblestone floor has been meticulously trimmed, and the walls behind the pewter-caged lanterns providing illumination have been scrubbed clean of soot. A lacquered linden table has been carved to follow the gentle curve of the circular tower wall, its surface covered by a woven sapphire blue table runner. You also see a riveted iron door. | |
| Obvious exits: none | |
On the linden table you see: an oiled oak and steel graver, a round-handled bright faenor graver, a heavy bronze graver, a tarnished pewter burin, an oval-handled blued steel burin, a leaf-etched sharp steel burin, a yew-handled gleaming steel burin, a sleek lilac-carved brush, a hog bristle brush, a gold-ferruled harlequin-motif brush, a spiral-carved white paintbrush, a gold-striped mahogany paintbrush, a thin copper-ferruled paintbrush, a narrow dark green paintbrush and an immaculately printed note.
an immaculately printed note
Burins and gravers will engrave a shape on many of the magical things you may stumble upon when hunting. Paintbrushes will put a dot of paint on them. I'm told this could be useful for wizards and their clientele. LOOK at them to see what each will engrave or paint. You may find chits to make them more versatile upon the bookshelves. They add the ability to paint in black or engrave a diamond, depending on your tool. The upstairs is STRICTLY off-limits. Don't even try. XOXO, The Proprietrix
an oiled oak and steel graver Weight: <1 pound
You analyze the oak and steel graver and sense that the creator has provided the following information:
This graver is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This graver can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your oak and steel graver is currently Tier 1 (off-the-shelf). The following verbs will work with the graver:
RUB, SLAP, TOUCH
Examine:
A glyph-encircled silver disk etched with an arc is inlaid into the handle of the graver.5000 a round-handled bright faenor graver Weight: <1 pound
You analyze the bright faenor graver and sense that the creator has provided the following information:
This graver is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This graver can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your bright faenor graver is currently Tier 1 (off-the-shelf). The following verbs will work with the graver:
RUB, SLAP, TOUCH
Examine:
A glyph-encircled silver disk etched with a hexagon is inlaid into the handle of the graver.5000 a heavy bronze graver Weight: <1 pound
You analyze the bronze graver and sense that the creator has provided the following information:
This graver is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This graver can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your bronze graver is currently Tier 1 (off-the-shelf). The following verbs will work with the graver:
RUB, SLAP, TOUCH
Examine:
A glyph-encircled silver disk etched with a circle is inlaid into the handle of the graver.5000 a tarnished pewter burin Weight: <1 pound
You analyze the pewter burin and sense that the creator has provided the following information:
This burin is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This burin can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your pewter burin is currently Tier 1 (off-the-shelf). The following verbs will work with the burin:
RUB, SLAP, TOUCH
Examine:
A glyph-encircled silver disk etched with a sphere is inlaid into the handle of the burin.5000 an oval-handled blued steel burin Weight: <1 pound
You analyze the blued steel burin and sense that the creator has provided the following information:
This burin is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This burin can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your blued steel burin is currently Tier 1 (off-the-shelf). The following verbs will work with the burin:
RUB, SLAP, TOUCH
Examine:
A glyph-encircled silver disk etched with a rhombus is inlaid into the handle of the burin.5000 a leaf-etched sharp steel burin Weight: <1 pound
You analyze the sharp steel burin and sense that the creator has provided the following information:
This burin is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This burin can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your sharp steel burin is currently Tier 1 (off-the-shelf). The following verbs will work with the burin:
RUB, SLAP, TOUCH
Examine:
A glyph-encircled silver disk etched with a triangle is inlaid into the handle of the burin.5000 a yew-handled gleaming steel burin Weight: <1 pound
You analyze the gleaming steel burin and sense that the creator has provided the following information:
This burin is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This burin can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your gleaming steel burin is currently Tier 1 (off-the-shelf). The following verbs will work with the burin:
RUB, SLAP, TOUCH
Examine:
A glyph-encircled silver disk etched with a square is inlaid into the handle of the burin.5000 a sleek lilac-carved brush Weight: <1 pound
You analyze the lilac-carved brush and sense that the creator has provided the following information:
This brush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This brush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your lilac-carved brush is currently Tier 1 (off-the-shelf). The following verbs will work with the brush:
WAVE, SLAP, TOUCH
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with purple paint.5000 a hog bristle brush Weight: <1 pound
You analyze the hog bristle brush and sense that the creator has provided the following information:
This brush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This brush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your hog bristle brush is currently Tier 1 (off-the-shelf). The following verbs will work with the brush:
WAVE, SLAP, TOUCH
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with red paint.5000 a gold-ferruled harlequin-motif brush Weight: <1 pound
You analyze the harlequin-motif brush and sense that the creator has provided the following information:
This brush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This brush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your harlequin-motif brush is currently Tier 1 (off-the-shelf). The following verbs will work with the brush:
WAVE, SLAP, TOUCH
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with yellow paint.5000 a spiral-carved white paintbrush Weight: <1 pound
You analyze the white paintbrush and sense that the creator has provided the following information:
This paintbrush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This paintbrush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your white paintbrush is currently Tier 1 (off-the-shelf). The following verbs will work with the paintbrush:
WAVE, SLAP, TOUCH
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with white paint.5000 a gold-striped mahogany paintbrush Weight: <1 pound
You analyze the mahogany paintbrush and sense that the creator has provided the following information:
This paintbrush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This paintbrush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your mahogany paintbrush is currently Tier 1 (off-the-shelf). The following verbs will work with the paintbrush:
WAVE, SLAP, TOUCH
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with gold paint.5000 a thin copper-ferruled paintbrush Weight: <1 pound
You analyze the copper-ferruled paintbrush and sense that the creator has provided the following information:
This paintbrush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This paintbrush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your copper-ferruled paintbrush is currently Tier 1 (off-the-shelf). The following verbs will work with the paintbrush:
WAVE, SLAP, TOUCH
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with blue paint.5000 a narrow dark green paintbrush Weight: <1 pound
You analyze the dark green paintbrush and sense that the creator has provided the following information:
This paintbrush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This paintbrush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your dark green paintbrush is currently Tier 1 (off-the-shelf). The following verbs will work with the paintbrush:
WAVE, SLAP, TOUCH
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with green paint.5000 On the bookshelves you see: a diamond-shaped linden chit painted obsidian black.
a diamond-shaped linden chit painted obsidian black Weight: <1 pound
Your chit is used to unlock the potential of things held in your other hand.
Your chit will unlock the second tier of a Wizard Marker. For an engraver, this will add a second diamond shape option and for a paintbrush, this will add a second black paint color option. FLIP the marker to switch between the two options after you use this chit.
RAISE the chit with a Tier 1 Wizard Marker in your other hand to unlock it to Tier 2.
You need only RAISE your chit while holding a compatible piece of equipment in your other hand.
Your chit may not be altered or changed in any way.
Examine:
As you glance over the chit you notice something written on it...
ANALYZE me for more info. RAISE me with a Tier 1 Wizard Marker in your other hand to unlock it to Tier 2.3000
Previous Inventory
a crumbling two-story stone tower overrun with vines, [Map Room #17], Lich#26876 , go stone tower
Make Your Mark, First Floor
| [Make Your Mark, First Floor -] | |
| Despite the worsening condition of the exterior of the tower, the inside is clean and neatly furnished with numerous bookshelves. The grass making its way between the cracks in the cobblestone floor has been meticulously trimmed, and the walls behind the pewter-caged lanterns providing illumination have been scrubbed clean of soot. A lacquered linden table has been carved to follow the gentle curve of the circular tower wall, its surface covered by a woven sapphire blue table runner. | |
| Obvious exits: none | |
On the linden table you see:
an oiled oak and steel graver Weight: <1 pound
This graver is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This graver can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your oak and steel graver is currently Tier 1 (off-the-shelf). The following verbs will work with the graver:
RUB, SLAP, TOUCH
Show:
A glyph-encircled silver disk etched with an arc is inlaid into the handle of the graver.5000 a round-handled bright faenor graver Weight: <1 pound
This graver is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This graver can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your bright faenor graver is currently Tier 1 (off-the-shelf). The following verbs will work with the graver:
RUB, SLAP, TOUCH
Show:
A glyph-encircled silver disk etched with a hexagon is inlaid into the handle of the graver.5000 a heavy bronze graver Weight: <1 pound
This graver is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This graver can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your bronze graver is currently Tier 1 (off-the-shelf). The following verbs will work with the graver:
RUB, SLAP, TOUCH
Show:
A glyph-encircled silver disk etched with a circle is inlaid into the handle of the graver.5000 a tarnished pewter burin Weight: <1 pound
This burin is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This burin can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your pewter burin is currently Tier 1 (off-the-shelf). The following verbs will work with the burin:
RUB, SLAP, TOUCH
Show:
A glyph-encircled silver disk etched with a sphere is inlaid into the handle of the burin.5000 an oval-handled blued steel burin Weight: <1 pound
This burin is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This burin can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your blued steel burin is currently Tier 1 (off-the-shelf). The following verbs will work with the burin:
RUB, SLAP, TOUCH
Show:
A glyph-encircled silver disk etched with a rhombus is inlaid into the handle of the burin.5000 a leaf-etched sharp steel burin Weight: <1 pound
This burin is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This burin can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your sharp steel burin is currently Tier 1 (off-the-shelf). The following verbs will work with the burin:
RUB, SLAP, TOUCH
Show:
A glyph-encircled silver disk etched with a triangle is inlaid into the handle of the burin.5000 a yew-handled gleaming steel burin Weight: <1 pound
This burin is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This burin can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your gleaming steel burin is currently Tier 1 (off-the-shelf). The following verbs will work with the burin:
RUB, SLAP, TOUCH
Show:
A glyph-encircled silver disk etched with a square is inlaid into the handle of the burin.5000 a sleek lilac-carved brush Weight: <1 pound
This brush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This brush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your lilac-carved brush is currently Tier 1 (off-the-shelf). The following verbs will work with the brush:
WAVE, SLAP, TOUCH
Show:
Minute glyphs encircle the ferrule just above the bristles which are saturated with purple paint.5000 a hog bristle brush Weight: <1 pound
This brush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This brush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your hog bristle brush is currently Tier 1 (off-the-shelf). The following verbs will work with the brush:
WAVE, SLAP, TOUCH
Show:
Minute glyphs encircle the ferrule just above the bristles which are saturated with red paint.5000 a gold-ferruled harlequin-motif brush Weight: <1 pound
This brush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This brush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your harlequin-motif brush is currently Tier 1 (off-the-shelf). The following verbs will work with the brush:
WAVE, SLAP, TOUCH
Show:
Minute glyphs encircle the ferrule just above the bristles which are saturated with yellow paint.5000 a spiral-carved white paintbrush Weight: <1 pound
This paintbrush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This paintbrush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your white paintbrush is currently Tier 1 (off-the-shelf). The following verbs will work with the paintbrush:
WAVE, SLAP, TOUCH
Show:
Minute glyphs encircle the ferrule just above the bristles which are saturated with white paint.5000 a gold-striped mahogany paintbrush Weight: <1 pound
This paintbrush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This paintbrush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your mahogany paintbrush is currently Tier 1 (off-the-shelf). The following verbs will work with the paintbrush:
WAVE, SLAP, TOUCH
Show:
Minute glyphs encircle the ferrule just above the bristles which are saturated with gold paint.5000 a thin copper-ferruled paintbrush Weight: <1 pound
This paintbrush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This paintbrush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your copper-ferruled paintbrush is currently Tier 1 (off-the-shelf). The following verbs will work with the paintbrush:
WAVE, SLAP, TOUCH
Show:
Minute glyphs encircle the ferrule just above the bristles which are saturated with blue paint.5000 a narrow dark green paintbrush Weight: <1 pound
This paintbrush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This paintbrush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your dark green paintbrush is currently Tier 1 (off-the-shelf). The following verbs will work with the paintbrush:
WAVE, SLAP, TOUCH
Show:
Minute glyphs encircle the ferrule just above the bristles which are saturated with green paint.5000 an immaculately printed note In the Common language, it reads:
Burins and gravers will engrave a shape on many of the magical things you may stumble upon when hunting. Paintbrushes will put a dot of paint on them. I'm told this could be useful for wizards and their clientele. LOOK at them to see what each will engrave or paint.
You may find chits to make them more versatile upon the bookshelves. They add the ability to paint in black or engrave a diamond, depending on your tool.
The upstairs is STRICTLY off-limits. Don't even try.
XOXO,
The ProprietrixOn the bookshelves you see:
a diamond-shaped linden chit painted obsidian black Weight: <1 pound
Your chit is used to unlock the potential of things held in your other hand.
Your chit will unlock the second tier of a Wizard Marker. For an engraver, this will add a second diamond shape option and for a paintbrush, this will add a second black paint color option. FLIP the marker to switch between the two options after you use this chit.
RAISE the chit with a Tier 1 Wizard Marker in your other hand to unlock it to Tier 2.
You need only RAISE your chit while holding a compatible piece of equipment in your other hand.
Your chit may not be altered or changed in any way.
Show:
As you glance over the chit you notice something written on it...
ANALYZE me for more info. RAISE me with a Tier 1 Wizard Marker in your other hand to unlock it to Tier 2.3000