BVShop:Make Your Mark/February 2020

a crumbling two-story stone tower overrun with vines, [Map Room #17], Lich#26876 , go stone tower

Make Your Mark, First Floor

[Make Your Mark, First Floor -]
Despite the worsening condition of the exterior of the tower, the inside is clean and neatly furnished with numerous bookshelves. The grass making its way between the cracks in the cobblestone floor has been meticulously trimmed, and the walls behind the pewter-caged lanterns providing illumination have been scrubbed clean of soot. A lacquered linden table has been carved to follow the gentle curve of the circular tower wall, its surface covered by a woven sapphire blue table runner.
Obvious exits: none

On the linden table you see:

an oiled oak and steel graver	Weight: <1 pound		analyze, show description Analyze: This graver is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first! *There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items. This graver can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing. Your oak and steel graver is currently Tier 1 (off-the-shelf). The following verbs will work with the graver: RUB, SLAP, TOUCH Show: A glyph-encircled silver disk etched with an arc is inlaid into the handle of the graver.	5000
a round-handled bright faenor graver	Weight: <1 pound		analyze, show description Analyze: This graver is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first! *There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items. This graver can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing. Your bright faenor graver is currently Tier 1 (off-the-shelf). The following verbs will work with the graver: RUB, SLAP, TOUCH Show: A glyph-encircled silver disk etched with a hexagon is inlaid into the handle of the graver.	5000
a heavy bronze graver	Weight: <1 pound		analyze, show description Analyze: This graver is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first! *There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items. This graver can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing. Your bronze graver is currently Tier 1 (off-the-shelf). The following verbs will work with the graver: RUB, SLAP, TOUCH Show: A glyph-encircled silver disk etched with a circle is inlaid into the handle of the graver.	5000
a tarnished pewter burin	Weight: <1 pound		analyze, show description Analyze: This burin is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first! *There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items. This burin can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing. Your pewter burin is currently Tier 1 (off-the-shelf). The following verbs will work with the burin: RUB, SLAP, TOUCH Show: A glyph-encircled silver disk etched with a sphere is inlaid into the handle of the burin.	5000
an oval-handled blued steel burin	Weight: <1 pound		analyze, show description Analyze: This burin is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first! *There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items. This burin can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing. Your blued steel burin is currently Tier 1 (off-the-shelf). The following verbs will work with the burin: RUB, SLAP, TOUCH Show: A glyph-encircled silver disk etched with a rhombus is inlaid into the handle of the burin.	5000
a leaf-etched sharp steel burin	Weight: <1 pound		analyze, show description Analyze: This burin is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first! *There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items. This burin can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing. Your sharp steel burin is currently Tier 1 (off-the-shelf). The following verbs will work with the burin: RUB, SLAP, TOUCH Show: A glyph-encircled silver disk etched with a triangle is inlaid into the handle of the burin.	5000
a yew-handled gleaming steel burin	Weight: <1 pound		analyze, show description Analyze: This burin is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first! *There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items. This burin can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing. Your gleaming steel burin is currently Tier 1 (off-the-shelf). The following verbs will work with the burin: RUB, SLAP, TOUCH Show: A glyph-encircled silver disk etched with a square is inlaid into the handle of the burin.	5000
a sleek lilac-carved brush	Weight: <1 pound		analyze, show description Analyze: This brush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first! *There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items. This brush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing. Your lilac-carved brush is currently Tier 1 (off-the-shelf). The following verbs will work with the brush: WAVE, SLAP, TOUCH Show: Minute glyphs encircle the ferrule just above the bristles which are saturated with purple paint.	5000
a hog bristle brush	Weight: <1 pound		analyze, show description Analyze: This brush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first! *There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items. This brush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing. Your hog bristle brush is currently Tier 1 (off-the-shelf). The following verbs will work with the brush: WAVE, SLAP, TOUCH Show: Minute glyphs encircle the ferrule just above the bristles which are saturated with red paint.	5000
a gold-ferruled harlequin-motif brush	Weight: <1 pound		analyze, show description Analyze: This brush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first! *There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items. This brush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing. Your harlequin-motif brush is currently Tier 1 (off-the-shelf). The following verbs will work with the brush: WAVE, SLAP, TOUCH Show: Minute glyphs encircle the ferrule just above the bristles which are saturated with yellow paint.	5000
a spiral-carved white paintbrush	Weight: <1 pound		analyze, show description Analyze: This paintbrush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first! *There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items. This paintbrush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing. Your white paintbrush is currently Tier 1 (off-the-shelf). The following verbs will work with the paintbrush: WAVE, SLAP, TOUCH Show: Minute glyphs encircle the ferrule just above the bristles which are saturated with white paint.	5000
a gold-striped mahogany paintbrush	Weight: <1 pound		analyze, show description Analyze: This paintbrush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first! *There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items. This paintbrush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing. Your mahogany paintbrush is currently Tier 1 (off-the-shelf). The following verbs will work with the paintbrush: WAVE, SLAP, TOUCH Show: Minute glyphs encircle the ferrule just above the bristles which are saturated with gold paint.	5000
a thin copper-ferruled paintbrush	Weight: <1 pound		analyze, show description Analyze: This paintbrush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first! *There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items. This paintbrush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing. Your copper-ferruled paintbrush is currently Tier 1 (off-the-shelf). The following verbs will work with the paintbrush: WAVE, SLAP, TOUCH Show: Minute glyphs encircle the ferrule just above the bristles which are saturated with blue paint.	5000
a narrow dark green paintbrush	Weight: <1 pound		analyze, show description Analyze: This paintbrush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first! *There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items. This paintbrush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing. Your dark green paintbrush is currently Tier 1 (off-the-shelf). The following verbs will work with the paintbrush: WAVE, SLAP, TOUCH Show: Minute glyphs encircle the ferrule just above the bristles which are saturated with green paint.	5000

an immaculately printed note

In the Common language, it reads:
Burins and gravers will engrave a shape on many of the magical things you may stumble upon when hunting.  Paintbrushes will put a dot of paint on them.  I'm told this could be useful for wizards and their clientele.  LOOK at them to see what each will engrave or paint.
You may find chits to make them more versatile upon the bookshelves.  They add the ability to paint in black or engrave a diamond, depending on your tool.
The upstairs is STRICTLY off-limits.  Don't even try.
XOXO,
The Proprietrix

On the bookshelves you see:

a diamond-shaped linden chit painted obsidian black

Weight: <1 pound

analyze, show description Analyze: Your chit is used to unlock the potential of things held in your other hand. Your chit will unlock the second tier of a Wizard Marker. For an engraver, this will add a second diamond shape option and for a paintbrush, this will add a second black paint color option. FLIP the marker to switch between the two options after you use this chit. RAISE the chit with a Tier 1 Wizard Marker in your other hand to unlock it to Tier 2. You need only RAISE your chit while holding a compatible piece of equipment in your other hand. Your chit may not be altered or changed in any way. Show: As you glance over the chit you notice something written on it... ANALYZE me for more info. RAISE me with a Tier 1 Wizard Marker in your other hand to unlock it to Tier 2.

3000