BVShop:Make Your Mark/full archive

The official GemStone IV encyclopedia.
< BVShop:Make Your Mark
Jump to navigation Jump to search

August 2024

a crumbling two-story stone tower overrun with vines, [Map Room 17], Room# 8214517, Lich# L26876, go stone tower

Make Your Mark

[Make Your Mark - 8212679]
Despite the worsening condition of the exterior of the tower, the inside is clean and neatly furnished with numerous bookshelves. The grass making its way between the cracks in the cobblestone floor has been meticulously trimmed, and the walls behind the pewter-caged lanterns providing illumination have been scrubbed clean of soot. A lacquered linden table has been carved to follow the gentle curve of the circular tower wall, its surface covered by a woven sapphire blue table runner. You also see a winding stone staircase leading to a trapdoor in the ceiling and a riveted iron door.
Obvious exits: none

On the linden table you see: an immaculately printed note, a brushed steel-ferruled paintbrush, a thin knobby twig paintbrush, a streaked marblewood paintbrush, a rune-inlaid glass and yew paintbrush, a narrow madder-stained paintbrush, a flame red leopardwood paintbrush, a volute ebonwood paintbrush, a ridged acacia burin, a smoothly carved tanik burin, a pale lavender burin, a ruby-tipped lacewood burin, a marble-banded white birch graver, and a lacquered mistwood graver.

an immaculately printed note
In the Common language, it reads:
Burins and gravers will engrave a shape on many of the magical things you may stumble upon when hunting.  Paintbrushes will put a dot of paint on them.  I'm told this could be useful for wizards and their clientele.  LOOK at them to see what each will engrave or paint.

You may find chits and other items to make them more versatile upon the bookshelves.

The upstairs is STRICTLY off-limits.  Don't even try.

XOXO,
The Proprietrix

Item Type Info Details Price
a brushed steel-ferruled paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This steel-ferruled paintbrush is a paintbrush-style Magic Marker.
Paint color: dark green
Tier: 1 of 2.
1,000
a thin knobby twig paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This knobby twig paintbrush is a paintbrush-style Magic Marker.
Paint color: cerulean
Tier: 1 of 2.
1,000
a streaked marblewood paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This marblewood paintbrush is a paintbrush-style Magic Marker.
Paint color: argent
Tier: 1 of 2.
1,000
a rune-inlaid glass and yew paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This glass and yew paintbrush is a paintbrush-style Magic Marker.
Paint color: ivory
Tier: 1 of 2.
1,000
a narrow madder-stained paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This madder-stained paintbrush is a paintbrush-style Magic Marker.
Paint color: saffron
Tier: 1 of 2.
1,000
a flame red leopardwood paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This leopardwood paintbrush is a paintbrush-style Magic Marker.
Paint color: crimson
Tier: 1 of 2.
1,000
a volute ebonwood paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This ebonwood paintbrush is a paintbrush-style Magic Marker.
Paint color: lavender
Tier: 1 of 2.
1,000
a ridged acacia burin < 1 lb
Magic Marker
Analyze
Analyze:
This acacia burin is a graver-style Magic Marker.
Engraving shape:  pyramid
Tier: 1 of 2.
1,000
a smoothly carved tanik burin < 1 lb
Magic Marker
Analyze
Analyze:
This carved tanik burin is a graver-style Magic Marker.
Engraving shape:  spiral
Tier: 1 of 2.
1,000
a pale lavender burin < 1 lb
Magic Marker
Analyze
Analyze:
This lavender burin is a graver-style Magic Marker.
Engraving shape:  pentagram
Tier: 1 of 2.
1,000
a ruby-tipped lacewood burin < 1 lb
Magic Marker
Analyze
Analyze:
This lacewood burin is a graver-style Magic Marker.
Engraving shape:  octagon
Tier: 1 of 2.
1,000
a marble-banded white birch graver < 1 lb
Magic Marker
Analyze
Analyze:
This white birch graver is a graver-style Magic Marker.
Engraving shape:  chevron
Tier: 1 of 2.
1,000
a lacquered mistwood graver < 1 lb
Magic Marker
Analyze
Analyze:
This mistwood graver is a graver-style Magic Marker.
Engraving shape:  helix
Tier: 1 of 2.
1,000

On the bookshelves you see: a diamond-shaped linden chit painted obsidian black, a quill token, a miniature pounce pot, and a faenor pentahedron.

Item Type Info Details Price
a diamond-shaped linden chit painted obsidian black unlock certificate
Magic Marker
This chit will unlock the second tier of a Magic Marker. For an engraver, this will add a second diamond shape option, and for a paintbrush, this will add a second black paint color option. FLIP the marker to switch between the two options after you use this chit. RAISE the chit with a Tier 1 Magic Marker in your other hand to unlock it to Tier 2.
500
a quill token unlock certificate
Magic Marker
This token will unlock a Magic Marker to add the ability to TAP it. TAP will toggle inscription of a read to the marked items that indicates the name of the person who marked the item.
1,000
a miniature pounce pot unlock certificate
Magic Marker
This pot will unlock a Magic Marker's ability to hollow out (lighten) small statues, heavymoonstone cubes, and heavy quartz orbs up to 5 times per day. Additional uses per day can be unlocked with a separate certificate.
5,000
a faenor pentahedron unlock certificate
Magic Marker
This pentahedron will adda single additional use to the daily maximum of the hollowing ability of a Magic Marker.
500

February 2024

a crumbling two-story stone tower overrun with vines, [Map Room 17], Room# 8214517, Lich# L26876, go stone tower

Make Your Mark

[Make Your Mark - 8212679]
Despite the worsening condition of the exterior of the tower, the inside is clean and neatly furnished with numerous bookshelves. The grass making its way between the cracks in the cobblestone floor has been meticulously trimmed, and the walls behind the pewter-caged lanterns providing illumination have been scrubbed clean of soot. A lacquered linden table has been carved to follow the gentle curve of the circular tower wall, its surface covered by a woven sapphire blue table runner. You also see a riveted iron door and a winding stone staircase leading to a trapdoor in the ceiling.
Obvious exits: none

On the bookshelves you see: a faenor pentahedron, a miniature pounce pot, a quill token, and a diamond-shaped linden chit painted obsidian black.

Item Type Info Details Price
a faenor pentahedron unlock certificate
Magic Marker
This pentahedron will adda single additional use to the daily maximum of the hollowing ability of a Magic Marker.
500
a miniature pounce pot unlock certificate
Magic Marker
This pot will unlock a Magic Marker's ability to hollow out (lighten) small statues, heavymoonstone cubes, and heavy quartz orbs up to 5 times per day. Additional uses per day can be unlocked with a separate certificate.
5,000
a quill token unlock certificate
Magic Marker
This token will unlock a Magic Marker to add the ability to TAP it. TAP will toggle inscription of a read to the marked items that indicates the name of the person who marked the item.
1,000
a diamond-shaped linden chit painted obsidian black unlock certificate
Magic Marker
This chit will unlock the second tier of a Magic Marker. For an engraver, this will add a second diamond shape option, and for a paintbrush, this will add a second black paint color option. FLIP the marker to switch between the two options after you use this chit. RAISE the chit with a Tier 1 Magic Marker in your other hand to unlock it to Tier 2.
500

On the linden table you see: a lacquered mistwood graver, a marble-banded white birch graver, a ruby-tipped lacewood burin, a pale lavender burin, a smoothly carved tanik burin, a ridged acacia burin, a volute ebonwood paintbrush, a flame red leopardwood paintbrush, a narrow madder-stained paintbrush, a rune-inlaid glass and yew paintbrush, a streaked marblewood paintbrush, a thin knobby twig paintbrush, a brushed steel-ferruled paintbrush, and an immaculately printed note.

an immaculately printed note
In the Common language, it reads:
Burins and gravers will engrave a shape on many of the magical things you may stumble upon when hunting.  Paintbrushes will put a dot of paint on them.  I'm told this could be useful for wizards and their clientele.  LOOK at them to see what each will engrave or paint.

You may find chits and other items to make them more versatile upon the bookshelves.

The upstairs is STRICTLY off-limits.  Don't even try.

XOXO,
The Proprietrix

Item Type Info Details Price
a lacquered mistwood graver < 1 lb
Magic Marker
Analyze
Analyze:
This mistwood graver is a graver-style Magic Marker.
Engraving shape:  helix
Tier: 1 of 2.
1,000
a marble-banded white birch graver < 1 lb
Magic Marker
Analyze
Analyze:
This white birch graver is a graver-style Magic Marker.
Engraving shape:  chevron
Tier: 1 of 2.
1,000
a ruby-tipped lacewood burin < 1 lb
Magic Marker
Analyze
Analyze:
This lacewood burin is a graver-style Magic Marker.
Engraving shape:  octagon
Tier: 1 of 2.
1,000
a pale lavender burin < 1 lb
Magic Marker
Analyze
Analyze:
This lavender burin is a graver-style Magic Marker.
Engraving shape:  pentagram
Tier: 1 of 2.
1,000
a smoothly carved tanik burin < 1 lb
Magic Marker
Analyze
Analyze:
This carved tanik burin is a graver-style Magic Marker.
Engraving shape:  spiral
Tier: 1 of 2.
1,000
a ridged acacia burin < 1 lb
Magic Marker
Analyze
Analyze:
This acacia burin is a graver-style Magic Marker.
Engraving shape:  pyramid
Tier: 1 of 2.
1,000
a volute ebonwood paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This ebonwood paintbrush is a paintbrush-style Magic Marker.
Paint color: lavender
Tier: 1 of 2.
1,000
a flame red leopardwood paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This leopardwood paintbrush is a paintbrush-style Magic Marker.
Paint color: crimson
Tier: 1 of 2.
1,000
a narrow madder-stained paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This madder-stained paintbrush is a paintbrush-style Magic Marker.
Paint color: saffron
Tier: 1 of 2.
1,000
a rune-inlaid glass and yew paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This glass and yew paintbrush is a paintbrush-style Magic Marker.
Paint color: ivory
Tier: 1 of 2.
1,000
a streaked marblewood paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This marblewood paintbrush is a paintbrush-style Magic Marker.
Paint color: argent
Tier: 1 of 2.
1,000
a thin knobby twig paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This knobby twig paintbrush is a paintbrush-style Magic Marker.
Paint color: cerulean
Tier: 1 of 2.
1,000
a brushed steel-ferruled paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This steel-ferruled paintbrush is a paintbrush-style Magic Marker.
Paint color: dark green
Tier: 1 of 2.
1,000

August 2023

a crumbling two-story stone tower overrun with vines, [Map Room 17], Room# 8214517, Lich# L26876, go stone tower

Make Your Mark

[Make Your Mark - 8212679]
Despite the worsening condition of the exterior of the tower, the inside is clean and neatly furnished with numerous bookshelves. The grass making its way between the cracks in the cobblestone floor has been meticulously trimmed, and the walls behind the pewter-caged lanterns providing illumination have been scrubbed clean of soot. A lacquered linden table has been carved to follow the gentle curve of the circular tower wall, its surface covered by a woven sapphire blue table runner. You also see a winding stone staircase leading to a trapdoor in the ceiling and a riveted iron door.
Obvious exits: none

On the linden table you see: an immaculately printed note, a brushed steel-ferruled paintbrush, a thin knobby twig paintbrush, a streaked marblewood paintbrush, a rune-inlaid glass and yew paintbrush, a narrow madder-stained paintbrush, a flame red leopardwood paintbrush, a volute ebonwood paintbrush, a ridged acacia burin, a smoothly carved tanik burin, a pale lavender burin, a ruby-tipped lacewood burin, a marble-banded white birch graver, and a lacquered mistwood graver.

an immaculately printed note
In the Common language, it reads:
Burins and gravers will engrave a shape on many of the magical things you may stumble upon when hunting.  Paintbrushes will put a dot of paint on them.  I'm told this could be useful for wizards and their clientele.  LOOK at them to see what each will engrave or paint.

You may find chits and other items to make them more versatile upon the bookshelves.

The upstairs is STRICTLY off-limits.  Don't even try.

XOXO,
The Proprietrix

Item Type Info Details Price
a brushed steel-ferruled paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This steel-ferruled paintbrush is a paintbrush-style Magic Marker.
Paint color: dark green
Tier: 1 of 2.
1,000
a thin knobby twig paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This knobby twig paintbrush is a paintbrush-style Magic Marker.
Paint color: cerulean
Tier: 1 of 2.
1,000
a streaked marblewood paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This marblewood paintbrush is a paintbrush-style Magic Marker.
Paint color: argent
Tier: 1 of 2.
1,000
a rune-inlaid glass and yew paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This glass and yew paintbrush is a paintbrush-style Magic Marker.
Paint color: ivory
Tier: 1 of 2.
1,000
a narrow madder-stained paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This madder-stained paintbrush is a paintbrush-style Magic Marker.
Paint color: saffron
Tier: 1 of 2.
1,000
a flame red leopardwood paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This leopardwood paintbrush is a paintbrush-style Magic Marker.
Paint color: crimson
Tier: 1 of 2.
1,000
a volute ebonwood paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This ebonwood paintbrush is a paintbrush-style Magic Marker.
Paint color: lavender
Tier: 1 of 2.
1,000
a ridged acacia burin < 1 lb
Magic Marker
Analyze
Analyze:
This acacia burin is a graver-style Magic Marker.
Engraving shape:  pyramid
Tier: 1 of 2.
1,000
a smoothly carved tanik burin < 1 lb
Magic Marker
Analyze
Analyze:
This carved tanik burin is a graver-style Magic Marker.
Engraving shape:  spiral
Tier: 1 of 2.
1,000
a pale lavender burin < 1 lb
Magic Marker
Analyze
Analyze:
This lavender burin is a graver-style Magic Marker.
Engraving shape:  pentagram
Tier: 1 of 2.
1,000
a ruby-tipped lacewood burin < 1 lb
Magic Marker
Analyze
Analyze:
This lacewood burin is a graver-style Magic Marker.
Engraving shape:  octagon
Tier: 1 of 2.
1,000
a marble-banded white birch graver < 1 lb
Magic Marker
Analyze
Analyze:
This white birch graver is a graver-style Magic Marker.
Engraving shape:  chevron
Tier: 1 of 2.
1,000
a lacquered mistwood graver < 1 lb
Magic Marker
Analyze
Analyze:
This mistwood graver is a graver-style Magic Marker.
Engraving shape:  helix
Tier: 1 of 2.
1,000

On the bookshelves you see: a diamond-shaped linden chit painted obsidian black, a quill token, a miniature pounce pot, and a faenor pentahedron.

Item Type Info Details Price
a diamond-shaped linden chit painted obsidian black unlock certificate
Magic Marker
This chit will unlock the second tier of a Magic Marker. For an engraver, this will add a second diamond shape option, and for a paintbrush, this will add a second black paint color option. FLIP the marker to switch between the two options after you use this chit. RAISE the chit with a Tier 1 Magic Marker in your other hand to unlock it to Tier 2.
500
a quill token unlock certificate
Magic Marker
This token will unlock a Magic Marker to add the ability to TAP it. TAP will toggle inscription of a read to the marked items that indicates the name of the person who marked the item.
1,000
a miniature pounce pot unlock certificate
Magic Marker
This pot will unlock a Magic Marker's ability to hollow out (lighten) small statues, heavymoonstone cubes, and heavy quartz orbs up to 5 times per day. Additional uses per day can be unlocked with a separate certificate.
5,000
a faenor pentahedron unlock certificate
Magic Marker
This pentahedron will adda single additional use to the daily maximum of the hollowing ability of a Magic Marker.
500

February 2023

a crumbling two-story stone tower overrun with vines, [Map Room 17], Room# 8214517, Lich# L26876, go stone tower

Make Your Mark

[Make Your Mark - 8212679]
Despite the worsening condition of the exterior of the tower, the inside is clean and neatly furnished with numerous bookshelves. The grass making its way between the cracks in the cobblestone floor has been meticulously trimmed, and the walls behind the pewter-caged lanterns providing illumination have been scrubbed clean of soot. A lacquered linden table has been carved to follow the gentle curve of the circular tower wall, its surface covered by a woven sapphire blue table runner. You also see a riveted iron door and a winding stone staircase leading to a trapdoor in the ceiling.
Obvious exits: none

On the bookshelves you see: a faenor pentahedron, a miniature pounce pot, a quill token, and a diamond-shaped linden chit painted obsidian black.

Item Type Info Details Price
a faenor pentahedron unlock certificate
Magic Marker

This pentahedron will add a single additional use to the daily maximum of the hollowing ability of a Magic Marker.

500
a miniature pounce pot unlock certificate
Magic Marker

This pot will unlock a Magic Marker's ability to hollow out (lighten) small statues, heavymoonstone cubes, and heavy quartz orbs up to 5 times per day. Additional uses per day can be unlocked with a separate certificate.

5,000
a quill token unlock certificate
Magic Marker

This token will unlock a Magic Marker to add the ability to TAP it. TAP will toggle inscription of a read to the marked items that indicates the name of the person who marked the item.

1,000
a diamond-shaped linden chit painted obsidian black unlock certificate
Magic Marker

Your chit will unlock the second tier of a Magic Marker. For an engraver, this will add a second diamond shape option and for a paintbrush, this will add a second black paint color option. FLIP the marker to switch between the two options after you use this chit. RAISE the chit with a Tier 1 Magic Marker in your other hand to unlock it to Tier 2.

500

On the linden table you see: a lacquered mistwood graver, a marble-banded white birch graver, a ruby-tipped lacewood burin, a pale lavender burin, a smoothly carved tanik burin, a ridged acacia burin, a volute ebonwood paintbrush, a flame red leopardwood paintbrush, a narrow madder-stained paintbrush, a rune-inlaid glass and yew paintbrush, a streaked marblewood paintbrush, a thin knobby twig paintbrush, a brushed steel-ferruled paintbrush, and an immaculately printed note.

an immaculately printed note
In the Common language, it reads:
Burins and gravers will engrave a shape on many of the magical things you may stumble upon when hunting.  Paintbrushes will put a dot of paint on them.  I'm told this could be useful for wizards and their clientele.  LOOK at them to see what each will engrave or paint.

You may find chits and other items to make them more versatile upon the bookshelves.

The upstairs is STRICTLY off-limits.  Don't even try.

XOXO,
The Proprietrix

Item Type Info Details Price
a lacquered mistwood graver < 1 lb
Magic Marker
Analyze
Analyze:
This graver is a Magic Marker to mark many kinds of magical loot you may find, specifically most* of the items that wizards can recharge.  It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes.  Use with caution as the marks may nullify the item's ability to be used with other scripted items.  Test first!

*There are some exclusions!  If it doesn't make sense to be painted or engraved, it won't mark it.  It also will NOT mark imbedded (420), blank imbeddable, holy receptacle (325), or imbued (614) items.

This graver can be altered to have a long description or a show added, but the noun must remain the same.  The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.  Any merchant may change the appearance of your graver, but only a few can customize the settings for shapes, colors, or read on the marked items.  Graver designs are limited to geometric shapes only, and paint colors must be fairly simple, no more than two words.

Your mistwood graver is currently Tier 1 (off-the-shelf).  The following verbs will work with the graver:

RUB, SLAP, TOUCH

1,000
a marble-banded white birch graver < 1 lb
Magic Marker
Analyze
Analyze:
This graver is a Magic Marker to mark many kinds of magical loot you may find, specifically most* of the items that wizards can recharge.  It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes.  Use with caution as the marks may nullify the item's ability to be used with other scripted items.  Test first!

*There are some exclusions!  If it doesn't make sense to be painted or engraved, it won't mark it.  It also will NOT mark imbedded (420), blank imbeddable, holy receptacle (325), or imbued (614) items.

This graver can be altered to have a long description or a show added, but the noun must remain the same.  The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.  Any merchant may change the appearance of your graver, but only a few can customize the settings for shapes, colors, or read on the marked items.  Graver designs are limited to geometric shapes only, and paint colors must be fairly simple, no more than two words.

Your white birch graver is currently Tier 1 (off-the-shelf).  The following verbs will work with the graver:

RUB, SLAP, TOUCH

1,000
a ruby-tipped lacewood burin < 1 lb
Magic Marker
Analyze
Analyze:
This burin is a Magic Marker to mark many kinds of magical loot you may find, specifically most* of the items that wizards can recharge.  It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes.  Use with caution as the marks may nullify the item's ability to be used with other scripted items.  Test first!

*There are some exclusions!  If it doesn't make sense to be painted or engraved, it won't mark it.  It also will NOT mark imbedded (420), blank imbeddable, holy receptacle (325), or imbued (614) items.

This burin can be altered to have a long description or a show added, but the noun must remain the same.  The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.  Any merchant may change the appearance of your burin, but only a few can customize the settings for shapes, colors, or read on the marked items.  Graver designs are limited to geometric shapes only, and paint colors must be fairly simple, no more than two words.

Your lacewood burin is currently Tier 1 (off-the-shelf).  The following verbs will work with the burin:

RUB, SLAP, TOUCH

1,000
a pale lavender burin < 1 lb
Magic Marker
Analyze
Analyze:
This burin is a Magic Marker to mark many kinds of magical loot you may find, specifically most* of the items that wizards can recharge.  It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes.  Use with caution as the marks may nullify the item's ability to be used with other scripted items.  Test first!

*There are some exclusions!  If it doesn't make sense to be painted or engraved, it won't mark it.  It also will NOT mark imbedded (420), blank imbeddable, holy receptacle (325), or imbued (614) items.

This burin can be altered to have a long description or a show added, but the noun must remain the same.  The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.  Any merchant may change the appearance of your burin, but only a few can customize the settings for shapes, colors, or read on the marked items.  Graver designs are limited to geometric shapes only, and paint colors must be fairly simple, no more than two words.

Your lavender burin is currently Tier 1 (off-the-shelf).  The following verbs will work with the burin:

RUB, SLAP, TOUCH

1,000
a smoothly carved tanik burin < 1 lb
Magic Marker
Analyze
Analyze:
This burin is a Magic Marker to mark many kinds of magical loot you may find, specifically most* of the items that wizards can recharge.  It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes.  Use with caution as the marks may nullify the item's ability to be used with other scripted items.  Test first!

*There are some exclusions!  If it doesn't make sense to be painted or engraved, it won't mark it.  It also will NOT mark imbedded (420), blank imbeddable, holy receptacle (325), or imbued (614) items.

This burin can be altered to have a long description or a show added, but the noun must remain the same.  The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.  Any merchant may change the appearance of your burin, but only a few can customize the settings for shapes, colors, or read on the marked items.  Graver designs are limited to geometric shapes only, and paint colors must be fairly simple, no more than two words.

Your carved tanik burin is currently Tier 1 (off-the-shelf).  The following verbs will work with the burin:

RUB, SLAP, TOUCH

1,000
a ridged acacia burin < 1 lb
Magic Marker
Analyze
Analyze:
This burin is a Magic Marker to mark many kinds of magical loot you may find, specifically most* of the items that wizards can recharge.  It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes.  Use with caution as the marks may nullify the item's ability to be used with other scripted items.  Test first!

*There are some exclusions!  If it doesn't make sense to be painted or engraved, it won't mark it.  It also will NOT mark imbedded (420), blank imbeddable, holy receptacle (325), or imbued (614) items.

This burin can be altered to have a long description or a show added, but the noun must remain the same.  The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.  Any merchant may change the appearance of your burin, but only a few can customize the settings for shapes, colors, or read on the marked items.  Graver designs are limited to geometric shapes only, and paint colors must be fairly simple, no more than two words.

Your acacia burin is currently Tier 1 (off-the-shelf).  The following verbs will work with the burin:

RUB, SLAP, TOUCH

1,000
a volute ebonwood paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This paintbrush is a Magic Marker to mark many kinds of magical loot you may find, specifically most* of the items that wizards can recharge.  It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes.  Use with caution as the marks may nullify the item's ability to be used with other scripted items.  Test first!

*There are some exclusions!  If it doesn't make sense to be painted or engraved, it won't mark it.  It also will NOT mark imbedded (420), blank imbeddable, holy receptacle (325), or imbued (614) items.

This paintbrush can be altered to have a long description or a show added, but the noun must remain the same.  The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.  Any merchant may change the appearance of your paintbrush, but only a few can customize the settings for shapes, colors, or read on the marked items.  Graver designs are limited to geometric shapes only, and paint colors must be fairly simple, no more than two words.

Your ebonwood paintbrush is currently Tier 1 (off-the-shelf).  The following verbs will work with the paintbrush:

WAVE, SLAP, TOUCH

1,000
a flame red leopardwood paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This paintbrush is a Magic Marker to mark many kinds of magical loot you may find, specifically most* of the items that wizards can recharge.  It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes.  Use with caution as the marks may nullify the item's ability to be used with other scripted items.  Test first!

*There are some exclusions!  If it doesn't make sense to be painted or engraved, it won't mark it.  It also will NOT mark imbedded (420), blank imbeddable, holy receptacle (325), or imbued (614) items.

This paintbrush can be altered to have a long description or a show added, but the noun must remain the same.  The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.  Any merchant may change the appearance of your paintbrush, but only a few can customize the settings for shapes, colors, or read on the marked items.  Graver designs are limited to geometric shapes only, and paint colors must be fairly simple, no more than two words.

Your leopardwood paintbrush is currently Tier 1 (off-the-shelf).  The following verbs will work with the paintbrush:

WAVE, SLAP, TOUCH

1,000
a narrow madder-stained paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This paintbrush is a Magic Marker to mark many kinds of magical loot you may find, specifically most* of the items that wizards can recharge.  It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes.  Use with caution as the marks may nullify the item's ability to be used with other scripted items.  Test first!

*There are some exclusions!  If it doesn't make sense to be painted or engraved, it won't mark it.  It also will NOT mark imbedded (420), blank imbeddable, holy receptacle (325), or imbued (614) items.

This paintbrush can be altered to have a long description or a show added, but the noun must remain the same.  The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.  Any merchant may change the appearance of your paintbrush, but only a few can customize the settings for shapes, colors, or read on the marked items.  Graver designs are limited to geometric shapes only, and paint colors must be fairly simple, no more than two words.

Your madder-stained paintbrush is currently Tier 1 (off-the-shelf).  The following verbs will work with the paintbrush:

WAVE, SLAP, TOUCH

1,000
a rune-inlaid glass and yew paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This paintbrush is a Magic Marker to mark many kinds of magical loot you may find, specifically most* of the items that wizards can recharge.  It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes.  Use with caution as the marks may nullify the item's ability to be used with other scripted items.  Test first!

*There are some exclusions!  If it doesn't make sense to be painted or engraved, it won't mark it.  It also will NOT mark imbedded (420), blank imbeddable, holy receptacle (325), or imbued (614) items.

This paintbrush can be altered to have a long description or a show added, but the noun must remain the same.  The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.  Any merchant may change the appearance of your paintbrush, but only a few can customize the settings for shapes, colors, or read on the marked items.  Graver designs are limited to geometric shapes only, and paint colors must be fairly simple, no more than two words.

Your glass and yew paintbrush is currently Tier 1 (off-the-shelf).  The following verbs will work with the paintbrush:

WAVE, SLAP, TOUCH

1,000
a streaked marblewood paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This paintbrush is a Magic Marker to mark many kinds of magical loot you may find, specifically most* of the items that wizards can recharge.  It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes.  Use with caution as the marks may nullify the item's ability to be used with other scripted items.  Test first!

*There are some exclusions!  If it doesn't make sense to be painted or engraved, it won't mark it.  It also will NOT mark imbedded (420), blank imbeddable, holy receptacle (325), or imbued (614) items.

This paintbrush can be altered to have a long description or a show added, but the noun must remain the same.  The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.  Any merchant may change the appearance of your paintbrush, but only a few can customize the settings for shapes, colors, or read on the marked items.  Graver designs are limited to geometric shapes only, and paint colors must be fairly simple, no more than two words.

Your marblewood paintbrush is currently Tier 1 (off-the-shelf).  The following verbs will work with the paintbrush:

WAVE, SLAP, TOUCH

1,000
a thin knobby twig paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This paintbrush is a Magic Marker to mark many kinds of magical loot you may find, specifically most* of the items that wizards can recharge.  It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes.  Use with caution as the marks may nullify the item's ability to be used with other scripted items.  Test first!

*There are some exclusions!  If it doesn't make sense to be painted or engraved, it won't mark it.  It also will NOT mark imbedded (420), blank imbeddable, holy receptacle (325), or imbued (614) items.

This paintbrush can be altered to have a long description or a show added, but the noun must remain the same.  The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.  Any merchant may change the appearance of your paintbrush, but only a few can customize the settings for shapes, colors, or read on the marked items.  Graver designs are limited to geometric shapes only, and paint colors must be fairly simple, no more than two words.

Your knobby twig paintbrush is currently Tier 1 (off-the-shelf).  The following verbs will work with the paintbrush:

WAVE, SLAP, TOUCH

1,000
a brushed steel-ferruled paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This paintbrush is a Magic Marker to mark many kinds of magical loot you may find, specifically most* of the items that wizards can recharge.  It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes.  Use with caution as the marks may nullify the item's ability to be used with other scripted items.  Test first!

*There are some exclusions!  If it doesn't make sense to be painted or engraved, it won't mark it.  It also will NOT mark imbedded (420), blank imbeddable, holy receptacle (325), or imbued (614) items.

This paintbrush can be altered to have a long description or a show added, but the noun must remain the same.  The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.  Any merchant may change the appearance of your paintbrush, but only a few can customize the settings for shapes, colors, or read on the marked items.  Graver designs are limited to geometric shapes only, and paint colors must be fairly simple, no more than two words.

Your steel-ferruled paintbrush is currently Tier 1 (off-the-shelf).  The following verbs will work with the paintbrush:

WAVE, SLAP, TOUCH

1,000

August 2022

a crumbling two-story stone tower overrun with vines, [Map Room 17], Room# 8214517, Lich# L26876, go stone tower

Make Your Mark

[Make Your Mark - 8212679]
Despite the worsening condition of the exterior of the tower, the inside is clean and neatly furnished with numerous bookshelves. The grass making its way between the cracks in the cobblestone floor has been meticulously trimmed, and the walls behind the pewter-caged lanterns providing illumination have been scrubbed clean of soot. A lacquered linden table has been carved to follow the gentle curve of the circular tower wall, its surface covered by a woven sapphire blue table runner. You also see a riveted iron door and a winding stone staircase leading to a trapdoor in the ceiling.
Obvious exits: none

On the bookshelves you see: a diamond-shaped linden chit painted obsidian black.

Item Type Info Details Price
a diamond-shaped linden chit painted obsidian black unlock certificate
Magic Marker

Your chit will unlock the second tier of a Magic Marker. For an engraver, this will add a second diamond shape option and for a paintbrush, this will add a second black paint color option. FLIP the marker to switch between the two options after you use this chit. RAISE the chit with a Tier 1 Magic Marker in your other hand to unlock it to Tier 2.

500

On the linden table you see: a faenor-veined zebrawood graver, an onyx-inlaid birch-handled graver, a patinated copper and teak burin, a glossy ebonwood burin, a spiral-etched yew and mithril burin, a grooved illthorn burin, a spiraling lavender paintbrush, a crimson hazelwood paintbrush, a saffron-stained paintbrush, an ivory-inlaid linden paintbrush, a silver-banded modwir paintbrush, a narrow brass-ferruled paintbrush, a dark green mesille paintbrush, and an immaculately printed note.

an immaculately printed note
In the Common language, it reads:
Burins and gravers will engrave a shape on many of the magical things you may stumble upon when hunting.  Paintbrushes will put a dot of paint on them.  I'm told this could be useful for wizards and their clientele.  LOOK at them to see what each will engrave or paint.

You may find chits to make them more versatile upon the bookshelves.  They add the ability to paint in black or engrave a diamond, depending on your tool.

The upstairs is STRICTLY off-limits.  Don't even try.

XOXO,
The Proprietrix

Item Type Info Details Price
a faenor-veined zebrawood graver < 1 lb
Magic Marker
Analyze
Analyze:
This graver is a Magic Marker to mark many kinds of magical loot you may find, specifically most* of the items that wizards can recharge.  It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes.  Use with caution as the marks may nullify the item's ability to be used with other scripted items.  Test first!

*There are some exclusions!  If it doesn't make sense to be painted or engraved, it won't mark it.  It also will NOT mark imbedded (420), blank imbeddable, holy receptacle (325), or imbued (614) items.

This graver can be altered to have a long description or a show added, but the noun must remain the same.  The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.  Any merchant may change the appearance of your graver, but only a few can customize the settings for shapes, colors, or read on the marked items.  Graver designs are limited to geometric shapes only, and paint colors must be fairly simple, no more than two words.

Your zebrawood graver is currently Tier 1 (off-the-shelf).  The following verbs will work with the graver:

RUB, SLAP, TOUCH

1,000
an onyx-inlaid birch-handled graver < 1 lb
Magic Marker
Analyze
Analyze:
This graver is a Magic Marker to mark many kinds of magical loot you may find, specifically most* of the items that wizards can recharge.  It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes.  Use with caution as the marks may nullify the item's ability to be used with other scripted items.  Test first!

*There are some exclusions!  If it doesn't make sense to be painted or engraved, it won't mark it.  It also will NOT mark imbedded (420), blank imbeddable, holy receptacle (325), or imbued (614) items.

This graver can be altered to have a long description or a show added, but the noun must remain the same.  The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.  Any merchant may change the appearance of your graver, but only a few can customize the settings for shapes, colors, or read on the marked items.  Graver designs are limited to geometric shapes only, and paint colors must be fairly simple, no more than two words.

Your birch-handled graver is currently Tier 1 (off-the-shelf).  The following verbs will work with the graver:

RUB, SLAP, TOUCH

1,000
a patinated copper and teak burin < 1 lb
Magic Marker
Analyze
Analyze:
This burin is a Magic Marker to mark many kinds of magical loot you may find, specifically most* of the items that wizards can recharge.  It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes.  Use with caution as the marks may nullify the item's ability to be used with other scripted items.  Test first!

*There are some exclusions!  If it doesn't make sense to be painted or engraved, it won't mark it.  It also will NOT mark imbedded (420), blank imbeddable, holy receptacle (325), or imbued (614) items.

This burin can be altered to have a long description or a show added, but the noun must remain the same.  The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.  Any merchant may change the appearance of your burin, but only a few can customize the settings for shapes, colors, or read on the marked items.  Graver designs are limited to geometric shapes only, and paint colors must be fairly simple, no more than two words.

Your copper and teak burin is currently Tier 1 (off-the-shelf).  The following verbs will work with the burin:

RUB, SLAP, TOUCH

1,000
a glossy ebonwood burin < 1 lb
Magic Marker
Analyze
Analyze:
This burin is a Magic Marker to mark many kinds of magical loot you may find, specifically most* of the items that wizards can recharge.  It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes.  Use with caution as the marks may nullify the item's ability to be used with other scripted items.  Test first!

*There are some exclusions!  If it doesn't make sense to be painted or engraved, it won't mark it.  It also will NOT mark imbedded (420), blank imbeddable, holy receptacle (325), or imbued (614) items.

This burin can be altered to have a long description or a show added, but the noun must remain the same.  The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.  Any merchant may change the appearance of your burin, but only a few can customize the settings for shapes, colors, or read on the marked items.  Graver designs are limited to geometric shapes only, and paint colors must be fairly simple, no more than two words.

Your ebonwood burin is currently Tier 1 (off-the-shelf).  The following verbs will work with the burin:

RUB, SLAP, TOUCH

1,000
a spiral-etched yew and mithril burin < 1 lb
Magic Marker
Analyze
Analyze:
This burin is a Magic Marker to mark many kinds of magical loot you may find, specifically most* of the items that wizards can recharge.  It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes.  Use with caution as the marks may nullify the item's ability to be used with other scripted items.  Test first!

*There are some exclusions!  If it doesn't make sense to be painted or engraved, it won't mark it.  It also will NOT mark imbedded (420), blank imbeddable, holy receptacle (325), or imbued (614) items.

This burin can be altered to have a long description or a show added, but the noun must remain the same.  The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.  Any merchant may change the appearance of your burin, but only a few can customize the settings for shapes, colors, or read on the marked items.  Graver designs are limited to geometric shapes only, and paint colors must be fairly simple, no more than two words.

Your yew and mithril burin is currently Tier 1 (off-the-shelf).  The following verbs will work with the burin:

RUB, SLAP, TOUCH

1,000
a grooved illthorn burin < 1 lb
Magic Marker
Analyze
Analyze:
This burin is a Magic Marker to mark many kinds of magical loot you may find, specifically most* of the items that wizards can recharge.  It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes.  Use with caution as the marks may nullify the item's ability to be used with other scripted items.  Test first!

*There are some exclusions!  If it doesn't make sense to be painted or engraved, it won't mark it.  It also will NOT mark imbedded (420), blank imbeddable, holy receptacle (325), or imbued (614) items.

This burin can be altered to have a long description or a show added, but the noun must remain the same.  The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.  Any merchant may change the appearance of your burin, but only a few can customize the settings for shapes, colors, or read on the marked items.  Graver designs are limited to geometric shapes only, and paint colors must be fairly simple, no more than two words.

Your illthorn burin is currently Tier 1 (off-the-shelf).  The following verbs will work with the burin:

RUB, SLAP, TOUCH

1,000
a spiraling lavender paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This paintbrush is a Magic Marker to mark many kinds of magical loot you may find, specifically most* of the items that wizards can recharge.  It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes.  Use with caution as the marks may nullify the item's ability to be used with other scripted items.  Test first!

*There are some exclusions!  If it doesn't make sense to be painted or engraved, it won't mark it.  It also will NOT mark imbedded (420), blank imbeddable, holy receptacle (325), or imbued (614) items.

This paintbrush can be altered to have a long description or a show added, but the noun must remain the same.  The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.  Any merchant may change the appearance of your paintbrush, but only a few can customize the settings for shapes, colors, or read on the marked items.  Graver designs are limited to geometric shapes only, and paint colors must be fairly simple, no more than two words.

Your lavender paintbrush is currently Tier 1 (off-the-shelf).  The following verbs will work with the paintbrush:

WAVE, SLAP, TOUCH

1,000
a crimson hazelwood paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This paintbrush is a Magic Marker to mark many kinds of magical loot you may find, specifically most* of the items that wizards can recharge.  It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes.  Use with caution as the marks may nullify the item's ability to be used with other scripted items.  Test first!

*There are some exclusions!  If it doesn't make sense to be painted or engraved, it won't mark it.  It also will NOT mark imbedded (420), blank imbeddable, holy receptacle (325), or imbued (614) items.

This paintbrush can be altered to have a long description or a show added, but the noun must remain the same.  The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.  Any merchant may change the appearance of your paintbrush, but only a few can customize the settings for shapes, colors, or read on the marked items.  Graver designs are limited to geometric shapes only, and paint colors must be fairly simple, no more than two words.

Your hazelwood paintbrush is currently Tier 1 (off-the-shelf).  The following verbs will work with the paintbrush:

WAVE, SLAP, TOUCH

1,000
a saffron-stained paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This paintbrush is a Magic Marker to mark many kinds of magical loot you may find, specifically most* of the items that wizards can recharge.  It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes.  Use with caution as the marks may nullify the item's ability to be used with other scripted items.  Test first!

*There are some exclusions!  If it doesn't make sense to be painted or engraved, it won't mark it.  It also will NOT mark imbedded (420), blank imbeddable, holy receptacle (325), or imbued (614) items.

This paintbrush can be altered to have a long description or a show added, but the noun must remain the same.  The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.  Any merchant may change the appearance of your paintbrush, but only a few can customize the settings for shapes, colors, or read on the marked items.  Graver designs are limited to geometric shapes only, and paint colors must be fairly simple, no more than two words.

Your saffron-stained paintbrush is currently Tier 1 (off-the-shelf).  The following verbs will work with the paintbrush:

WAVE, SLAP, TOUCH

1,000
an ivory-inlaid linden paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This paintbrush is a Magic Marker to mark many kinds of magical loot you may find, specifically most* of the items that wizards can recharge.  It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes.  Use with caution as the marks may nullify the item's ability to be used with other scripted items.  Test first!

*There are some exclusions!  If it doesn't make sense to be painted or engraved, it won't mark it.  It also will NOT mark imbedded (420), blank imbeddable, holy receptacle (325), or imbued (614) items.

This paintbrush can be altered to have a long description or a show added, but the noun must remain the same.  The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.  Any merchant may change the appearance of your paintbrush, but only a few can customize the settings for shapes, colors, or read on the marked items.  Graver designs are limited to geometric shapes only, and paint colors must be fairly simple, no more than two words.

Your linden paintbrush is currently Tier 1 (off-the-shelf).  The following verbs will work with the paintbrush:

WAVE, SLAP, TOUCH

1,000
a silver-banded modwir paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This paintbrush is a Magic Marker to mark many kinds of magical loot you may find, specifically most* of the items that wizards can recharge.  It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes.  Use with caution as the marks may nullify the item's ability to be used with other scripted items.  Test first!

*There are some exclusions!  If it doesn't make sense to be painted or engraved, it won't mark it.  It also will NOT mark imbedded (420), blank imbeddable, holy receptacle (325), or imbued (614) items.

This paintbrush can be altered to have a long description or a show added, but the noun must remain the same.  The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.  Any merchant may change the appearance of your paintbrush, but only a few can customize the settings for shapes, colors, or read on the marked items.  Graver designs are limited to geometric shapes only, and paint colors must be fairly simple, no more than two words.

Your modwir paintbrush is currently Tier 1 (off-the-shelf).  The following verbs will work with the paintbrush:

WAVE, SLAP, TOUCH

1,000
a narrow brass-ferruled paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This paintbrush is a Magic Marker to mark many kinds of magical loot you may find, specifically most* of the items that wizards can recharge.  It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes.  Use with caution as the marks may nullify the item's ability to be used with other scripted items.  Test first!

*There are some exclusions!  If it doesn't make sense to be painted or engraved, it won't mark it.  It also will NOT mark imbedded (420), blank imbeddable, holy receptacle (325), or imbued (614) items.

This paintbrush can be altered to have a long description or a show added, but the noun must remain the same.  The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.  Any merchant may change the appearance of your paintbrush, but only a few can customize the settings for shapes, colors, or read on the marked items.  Graver designs are limited to geometric shapes only, and paint colors must be fairly simple, no more than two words.

Your brass-ferruled paintbrush is currently Tier 1 (off-the-shelf).  The following verbs will work with the paintbrush:

WAVE, SLAP, TOUCH

1,000
a dark green mesille paintbrush < 1 lb
Magic Marker
Analyze
Analyze:
This paintbrush is a Magic Marker to mark many kinds of magical loot you may find, specifically most* of the items that wizards can recharge.  It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes.  Use with caution as the marks may nullify the item's ability to be used with other scripted items.  Test first!

*There are some exclusions!  If it doesn't make sense to be painted or engraved, it won't mark it.  It also will NOT mark imbedded (420), blank imbeddable, holy receptacle (325), or imbued (614) items.

This paintbrush can be altered to have a long description or a show added, but the noun must remain the same.  The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.  Any merchant may change the appearance of your paintbrush, but only a few can customize the settings for shapes, colors, or read on the marked items.  Graver designs are limited to geometric shapes only, and paint colors must be fairly simple, no more than two words.

Your mesille paintbrush is currently Tier 1 (off-the-shelf).  The following verbs will work with the paintbrush:

WAVE, SLAP, TOUCH

1,000

February 2022

2022Q1

a crumbling two-story stone tower overrun with vines, [Map Room #17], Lich# 26876, go stone tower

Make Your Mark

[Make Your Mark -]
Despite the worsening condition of the exterior of the tower, the inside is clean and neatly furnished with numerous bookshelves. The grass making its way between the cracks in the cobblestone floor has been meticulously trimmed, and the walls behind the pewter-caged lanterns providing illumination have been scrubbed clean of soot. A lacquered linden table has been carved to follow the gentle curve of the circular tower wall, its surface covered by a woven sapphire blue table runner. You also see a riveted iron door.
Obvious exits: none

On the linden table you see: a faenor-veined zebrawood graver, an onyx-inlaid birch-handled graver, a patinated copper and teak burin, a glossy ebonwood burin, a spiral-etched yew and mithril burin, a grooved illthorn burin, a spiraling lavender paintbrush, a crimson hazelwood paintbrush, a saffron-stained paintbrush, an ivory-inlaid linden paintbrush, a silver-banded modwir paintbrush, a narrow brass-ferruled paintbrush, a dark green mesille paintbrush and an immaculately printed note.

an immaculately printed note
Burins and gravers will engrave a shape on many of the magical things you may stumble upon when hunting. Paintbrushes will put a dot of paint on them. I'm told this could be useful for wizards and their clientele. LOOK at them to see what each will engrave or paint. You may find chits to make them more versatile upon the bookshelves. They add the ability to paint in black or engrave a diamond, depending on your tool. The upstairs is STRICTLY off-limits. Don't even try. XOXO, The Proprietrix
a faenor-veined zebrawood graver Weight: <1 pound Magic Marker
examine
Examine:
A glyph-encircled silver disk etched with a helix is inlaid into the handle of the graver.
1,000
an onyx-inlaid birch-handled graver Weight: <1 pound Magic Marker
examine
Examine:
A glyph-encircled silver disk etched with a chevron is inlaid into the handle of the graver.
1,000
a patinated copper and teak burin Weight: <1 pound Magic Marker
examine
Examine:
A glyph-encircled silver disk etched with an octagon is inlaid into the handle of the burin.
1,000
a glossy ebonwood burin Weight: <1 pound Magic Marker
examine
Examine:
A glyph-encircled silver disk etched with a pentagram is inlaid into the handle of the burin.
1,000
a spiral-etched yew and mithril burin Weight: <1 pound Magic Marker
examine
Examine:
A glyph-encircled silver disk etched with a spiral is inlaid into the handle of the burin.
1,000
a grooved illthorn burin Weight: <1 pound Magic Marker
examine
Examine:
A glyph-encircled silver disk etched with a pyramid is inlaid into the handle of the burin.
1,000
a spiraling lavender paintbrush Weight: <1 pound Magic Marker
examine
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with lavender paint.
1,000
a crimson hazelwood paintbrush Weight: <1 pound Magic Marker
examine
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with crimson paint.
1,000
a saffron-stained paintbrush Weight: <1 pound Magic Marker
examine
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with saffron paint.
1,000
an ivory-inlaid linden paintbrush Weight: <1 pound Magic Marker
examine
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with ivory paint.
1,000
a silver-banded modwir paintbrush Weight: <1 pound Magic Marker
examine
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with argent paint.
1,000
a narrow brass-ferruled paintbrush Weight: <1 pound Magic Marker
examine
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with cerulean paint.
1,000
a dark green mesille paintbrush Weight: <1 pound Magic Marker
examine
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with dark green paint.
1,000

On the bookshelves you see: a diamond-shaped linden chit painted obsidian black.

a diamond-shaped linden chit painted obsidian black Weight: <1 pound Unlock Magic Marker to Tier 2
analyze, examine
Analyze:
Your chit is used to unlock the potential of things held in your other hand.

Your chit will unlock the second tier of a Magic Marker. For an engraver, this will add a second diamond shape option and for a paintbrush, this will add a second black paint color option. FLIP the marker to switch between the two options after you use this chit.

RAISE the chit with a Tier 1 Magic Marker in your other hand to unlock it to Tier 2.

You need only RAISE your chit while holding a compatible piece of equipment in your other hand.

Your chit may not be altered or changed in any way.

Examine:
ANALYZE me for more info. RAISE me with a Tier 1 Wizard Marker in your other hand to unlock it to Tier 2.

500

August 2021

2021Q3

a crumbling two-story stone tower overrun with vines, [Map Room #17], Lich# 26876, go stone tower

Make Your Mark

[Make Your Mark -]
Despite the worsening condition of the exterior of the tower, the inside is clean and neatly furnished with numerous bookshelves. The grass making its way between the cracks in the cobblestone floor has been meticulously trimmed, and the walls behind the pewter-caged lanterns providing illumination have been scrubbed clean of soot. A lacquered linden table has been carved to follow the gentle curve of the circular tower wall, its surface covered by a woven sapphire blue table runner. You also see a riveted iron door.
Obvious exits: none

On the linden table you see: a faenor-veined zebrawood graver, an onyx-inlaid birch-handled graver, a patinated copper and teak burin, a glossy ebonwood burin, a spiral-etched yew and mithril burin, a grooved illthorn burin, a spiraling lavender paintbrush, a crimson hazelwood paintbrush, a saffron-stained paintbrush, an ivory-inlaid linden paintbrush, a silver-banded modwir paintbrush, a narrow brass-ferruled paintbrush, a dark green mesille paintbrush and an immaculately printed note.

an immaculately printed note
Burins and gravers will engrave a shape on many of the magical things you may stumble upon when hunting. Paintbrushes will put a dot of paint on them. I'm told this could be useful for wizards and their clientele. LOOK at them to see what each will engrave or paint. You may find chits to make them more versatile upon the bookshelves. They add the ability to paint in black or engrave a diamond, depending on your tool. The upstairs is STRICTLY off-limits. Don't even try. XOXO, The Proprietrix
a faenor-veined zebrawood graver Weight: <1 pound Magic Marker
examine
Examine:
A glyph-encircled silver disk etched with a helix is inlaid into the handle of the graver.
1,000
an onyx-inlaid birch-handled graver Weight: <1 pound Magic Marker
examine
Examine:
A glyph-encircled silver disk etched with a chevron is inlaid into the handle of the graver.
1,000
a patinated copper and teak burin Weight: <1 pound Magic Marker
examine
Examine:
A glyph-encircled silver disk etched with an octagon is inlaid into the handle of the burin.
1,000
a glossy ebonwood burin Weight: <1 pound Magic Marker
examine
Examine:
A glyph-encircled silver disk etched with a pentagram is inlaid into the handle of the burin.
1,000
a spiral-etched yew and mithril burin Weight: <1 pound Magic Marker
examine
Examine:
A glyph-encircled silver disk etched with a spiral is inlaid into the handle of the burin.
1,000
a grooved illthorn burin Weight: <1 pound Magic Marker
examine
Examine:
A glyph-encircled silver disk etched with a pyramid is inlaid into the handle of the burin.
1,000
a spiraling lavender paintbrush Weight: <1 pound Magic Marker
examine
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with lavender paint.
1,000
a crimson hazelwood paintbrush Weight: <1 pound Magic Marker
examine
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with crimson paint.
1,000
a saffron-stained paintbrush Weight: <1 pound Magic Marker
examine
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with saffron paint.
1,000
an ivory-inlaid linden paintbrush Weight: <1 pound Magic Marker
examine
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with ivory paint.
1,000
a silver-banded modwir paintbrush Weight: <1 pound Magic Marker
examine
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with argent paint.
1,000
a narrow brass-ferruled paintbrush Weight: <1 pound Magic Marker
examine
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with cerulean paint.
1,000
a dark green mesille paintbrush Weight: <1 pound Magic Marker
examine
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with dark green paint.
1,000

On the bookshelves you see: a diamond-shaped linden chit painted obsidian black.

a diamond-shaped linden chit painted obsidian black Weight: <1 pound Unlock Magic Marker to Tier 2
analyze, examine
Analyze:
Your chit is used to unlock the potential of things held in your other hand.

Your chit will unlock the second tier of a Magic Marker. For an engraver, this will add a second diamond shape option and for a paintbrush, this will add a second black paint color option. FLIP the marker to switch between the two options after you use this chit.

RAISE the chit with a Tier 1 Magic Marker in your other hand to unlock it to Tier 2.

You need only RAISE your chit while holding a compatible piece of equipment in your other hand.

Your chit may not be altered or changed in any way.

Examine:
ANALYZE me for more info. RAISE me with a Tier 1 Wizard Marker in your other hand to unlock it to Tier 2.

500

February 2021

2021Q1

a crumbling two-story stone tower overrun with vines, [Map Room #17], Lich#26876 , go stone tower

Make Your Mark

[Make Your Mark -]
Despite the worsening condition of the exterior of the tower, the inside is clean and neatly furnished with numerous bookshelves. The grass making its way between the cracks in the cobblestone floor has been meticulously trimmed, and the walls behind the pewter-caged lanterns providing illumination have been scrubbed clean of soot. A lacquered linden table has been carved to follow the gentle curve of the circular tower wall, its surface covered by a woven sapphire blue table runner. You also see a riveted iron door.
Obvious exits: none

On the linden table you see: an immaculately printed note, a dark green mesille paintbrush, a narrow brass-ferruled paintbrush, a silver-banded modwir paintbrush, an ivory-inlaid linden paintbrush, a saffron-stained paintbrush, a crimson hazelwood paintbrush, a spiraling lavender paintbrush, a grooved illthorn burin, a spiral-etched yew and mithril burin, a glossy ebonwood burin, a patinated copper and teak burin, an onyx-inlaid birch-handled graver and a faenor-veined zebrawood graver.

an immaculately printed note
Burins and gravers will engrave a shape on many of the magical things you may stumble upon when hunting. Paintbrushes will put a dot of paint on them. I'm told this could be useful for wizards and their clientele. LOOK at them to see what each will engrave or paint. You may find chits to make them more versatile upon the bookshelves. They add the ability to paint in black or engrave a diamond, depending on your tool. The upstairs is STRICTLY off-limits. Don't even try. XOXO, The Proprietrix
a dark green mesille paintbrush Weight: <1 pound Magic Marker
examine
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with dark green paint.
1,000
a narrow brass-ferruled paintbrush Weight: <1 pound Magic Marker
examine
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with cerulean paint.
1,000
a silver-banded modwir paintbrush Weight: <1 pound Magic Marker
examine
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with argent paint.
1,000
an ivory-inlaid linden paintbrush Weight: <1 pound Magic Marker
examine
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with ivory paint.
1,000
a saffron-stained paintbrush Weight: <1 pound Magic Marker
examine
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with saffron paint.
1,000
a crimson hazelwood paintbrush Weight: <1 pound Magic Marker
examine
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with crimson paint.
1,000
a spiraling lavender paintbrush Weight: <1 pound Magic Marker
examine
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with lavender paint.
1,000
a grooved illthorn burin Weight: <1 pound Magic Marker
examine
Examine:
A glyph-encircled silver disk etched with a pyramid is inlaid into the handle of the burin.
1,000
a spiral-etched yew and mithril burin Weight: <1 pound Magic Marker
examine
Examine:
A glyph-encircled silver disk etched with a spiral is inlaid into the handle of the burin.
1,000
a glossy ebonwood burin Weight: <1 pound Magic Marker
examine
Examine:
A glyph-encircled silver disk etched with a pentagram is inlaid into the handle of the burin.
1,000
a patinated copper and teak burin Weight: <1 pound Magic Marker
examine
Examine:
A glyph-encircled silver disk etched with an octagon is inlaid into the handle of the burin.
1,000
an onyx-inlaid birch-handled graver Weight: <1 pound Magic Marker
examine
Examine:
A glyph-encircled silver disk etched with a chevron is inlaid into the handle of the graver.
1,000
a faenor-veined zebrawood graver Weight: <1 pound Magic Marker
examine
Examine:
A glyph-encircled silver disk etched with a helix is inlaid into the handle of the graver.
1,000

On the bookshelves you see: a diamond-shaped linden chit painted obsidian black.

a diamond-shaped linden chit painted obsidian black Weight: <1 pound
analyze, examine
Analyze:
Your chit is used to unlock the potential of things held in your other hand.

Your chit will unlock the second tier of a Magic Marker. For an engraver, this will add a second diamond shape option and for a paintbrush, this will add a second black paint color option. FLIP the marker to switch between the two options after you use this chit.

RAISE the chit with a Tier 1 Magic Marker in your other hand to unlock it to Tier 2.

You need only RAISE your chit while holding a compatible piece of equipment in your other hand.

Your chit may not be altered or changed in any way.

Examine:
You glance at a diamond-shaped linden chit painted obsidian black.
You notice something written on it...

ANALYZE me for more info. RAISE me with a Tier 1 Wizard Marker in your other hand to unlock it to Tier 2.

500

August 2020

2020Q3

a crumbling two-story stone tower overrun with vines, [Map Room #17], Lich#26876 , go stone tower

Make Your Mark, First Floor

[Make Your Mark, First Floor -]
Despite the worsening condition of the exterior of the tower, the inside is clean and neatly furnished with numerous bookshelves. The grass making its way between the cracks in the cobblestone floor has been meticulously trimmed, and the walls behind the pewter-caged lanterns providing illumination have been scrubbed clean of soot. A lacquered linden table has been carved to follow the gentle curve of the circular tower wall, its surface covered by a woven sapphire blue table runner. You also see a riveted iron door.
Obvious exits: none

On the linden table you see: an oiled oak and steel graver, a round-handled bright faenor graver, a heavy bronze graver, a tarnished pewter burin, an oval-handled blued steel burin, a leaf-etched sharp steel burin, a yew-handled gleaming steel burin, a sleek lilac-carved brush, a hog bristle brush, a gold-ferruled harlequin-motif brush, a spiral-carved white paintbrush, a gold-striped mahogany paintbrush, a thin copper-ferruled paintbrush, a narrow dark green paintbrush and an immaculately printed note.

an immaculately printed note
Burins and gravers will engrave a shape on many of the magical things you may stumble upon when hunting. Paintbrushes will put a dot of paint on them. I'm told this could be useful for wizards and their clientele. LOOK at them to see what each will engrave or paint. You may find chits to make them more versatile upon the bookshelves. They add the ability to paint in black or engrave a diamond, depending on your tool. The upstairs is STRICTLY off-limits. Don't even try. XOXO, The Proprietrix
an oiled oak and steel graver Weight: <1 pound
analyze, examine
Analyze:
You analyze the oak and steel graver and sense that the creator has provided the following information:

This graver is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!

*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.

This graver can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.

Your oak and steel graver is currently Tier 1 (off-the-shelf). The following verbs will work with the graver:

RUB, SLAP, TOUCH
Examine:
A glyph-encircled silver disk etched with an arc is inlaid into the handle of the graver.

5000
a round-handled bright faenor graver Weight: <1 pound
analyze, examine
Analyze:
You analyze the bright faenor graver and sense that the creator has provided the following information:

This graver is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!

*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.

This graver can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.

Your bright faenor graver is currently Tier 1 (off-the-shelf). The following verbs will work with the graver:

RUB, SLAP, TOUCH
Examine:
A glyph-encircled silver disk etched with a hexagon is inlaid into the handle of the graver.

5000
a heavy bronze graver Weight: <1 pound
analyze, examine
Analyze:
You analyze the bronze graver and sense that the creator has provided the following information:

This graver is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!

*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.

This graver can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.

Your bronze graver is currently Tier 1 (off-the-shelf). The following verbs will work with the graver:

RUB, SLAP, TOUCH
Examine:
A glyph-encircled silver disk etched with a circle is inlaid into the handle of the graver.

5000
a tarnished pewter burin Weight: <1 pound
analyze, examine
Analyze:
You analyze the pewter burin and sense that the creator has provided the following information:

This burin is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!

*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.

This burin can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.

Your pewter burin is currently Tier 1 (off-the-shelf). The following verbs will work with the burin:

RUB, SLAP, TOUCH
Examine:
A glyph-encircled silver disk etched with a sphere is inlaid into the handle of the burin.

5000
an oval-handled blued steel burin Weight: <1 pound
analyze, examine
Analyze:
You analyze the blued steel burin and sense that the creator has provided the following information:

This burin is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!

*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.

This burin can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.

Your blued steel burin is currently Tier 1 (off-the-shelf). The following verbs will work with the burin:

RUB, SLAP, TOUCH
Examine:
A glyph-encircled silver disk etched with a rhombus is inlaid into the handle of the burin.

5000
a leaf-etched sharp steel burin Weight: <1 pound
analyze, examine
Analyze:
You analyze the sharp steel burin and sense that the creator has provided the following information:

This burin is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!

*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.

This burin can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.

Your sharp steel burin is currently Tier 1 (off-the-shelf). The following verbs will work with the burin:

RUB, SLAP, TOUCH
Examine:
A glyph-encircled silver disk etched with a triangle is inlaid into the handle of the burin.

5000
a yew-handled gleaming steel burin Weight: <1 pound
analyze, examine
Analyze:
You analyze the gleaming steel burin and sense that the creator has provided the following information:

This burin is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!

*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.

This burin can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.

Your gleaming steel burin is currently Tier 1 (off-the-shelf). The following verbs will work with the burin:

RUB, SLAP, TOUCH
Examine:
A glyph-encircled silver disk etched with a square is inlaid into the handle of the burin.

5000
a sleek lilac-carved brush Weight: <1 pound
analyze, examine
Analyze:
You analyze the lilac-carved brush and sense that the creator has provided the following information:

This brush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!

*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.

This brush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.

Your lilac-carved brush is currently Tier 1 (off-the-shelf). The following verbs will work with the brush:

WAVE, SLAP, TOUCH
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with purple paint.

5000
a hog bristle brush Weight: <1 pound
analyze, examine
Analyze:
You analyze the hog bristle brush and sense that the creator has provided the following information:

This brush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!

*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.

This brush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.

Your hog bristle brush is currently Tier 1 (off-the-shelf). The following verbs will work with the brush:

WAVE, SLAP, TOUCH
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with red paint.

5000
a gold-ferruled harlequin-motif brush Weight: <1 pound
analyze, examine
Analyze:
You analyze the harlequin-motif brush and sense that the creator has provided the following information:

This brush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!

*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.

This brush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.

Your harlequin-motif brush is currently Tier 1 (off-the-shelf). The following verbs will work with the brush:

WAVE, SLAP, TOUCH
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with yellow paint.

5000
a spiral-carved white paintbrush Weight: <1 pound
analyze, examine
Analyze:
You analyze the white paintbrush and sense that the creator has provided the following information:

This paintbrush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!

*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.

This paintbrush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.

Your white paintbrush is currently Tier 1 (off-the-shelf). The following verbs will work with the paintbrush:

WAVE, SLAP, TOUCH
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with white paint.

5000
a gold-striped mahogany paintbrush Weight: <1 pound
analyze, examine
Analyze:
You analyze the mahogany paintbrush and sense that the creator has provided the following information:

This paintbrush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!

*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.

This paintbrush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.

Your mahogany paintbrush is currently Tier 1 (off-the-shelf). The following verbs will work with the paintbrush:

WAVE, SLAP, TOUCH
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with gold paint.

5000
a thin copper-ferruled paintbrush Weight: <1 pound
analyze, examine
Analyze:
You analyze the copper-ferruled paintbrush and sense that the creator has provided the following information:

This paintbrush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!

*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.

This paintbrush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.

Your copper-ferruled paintbrush is currently Tier 1 (off-the-shelf). The following verbs will work with the paintbrush:

WAVE, SLAP, TOUCH
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with blue paint.

5000
a narrow dark green paintbrush Weight: <1 pound
analyze, examine
Analyze:
You analyze the dark green paintbrush and sense that the creator has provided the following information:

This paintbrush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!

*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.

This paintbrush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.

Your dark green paintbrush is currently Tier 1 (off-the-shelf). The following verbs will work with the paintbrush:

WAVE, SLAP, TOUCH
Examine:
Minute glyphs encircle the ferrule just above the bristles which are saturated with green paint.

5000

On the bookshelves you see: a diamond-shaped linden chit painted obsidian black.

a diamond-shaped linden chit painted obsidian black Weight: <1 pound
analyze, examine
Analyze:
Your chit is used to unlock the potential of things held in your other hand.

Your chit will unlock the second tier of a Wizard Marker. For an engraver, this will add a second diamond shape option and for a paintbrush, this will add a second black paint color option. FLIP the marker to switch between the two options after you use this chit.

RAISE the chit with a Tier 1 Wizard Marker in your other hand to unlock it to Tier 2.

You need only RAISE your chit while holding a compatible piece of equipment in your other hand.

Your chit may not be altered or changed in any way.

Examine:
As you glance over the chit you notice something written on it...

ANALYZE me for more info. RAISE me with a Tier 1 Wizard Marker in your other hand to unlock it to Tier 2.

3000

February 2020

Make Your Mark

a crumbling two-story stone tower overrun with vines, [Map Room #17], Lich#26876 , go stone tower

Make Your Mark, First Floor

[Make Your Mark, First Floor -]
Despite the worsening condition of the exterior of the tower, the inside is clean and neatly furnished with numerous bookshelves. The grass making its way between the cracks in the cobblestone floor has been meticulously trimmed, and the walls behind the pewter-caged lanterns providing illumination have been scrubbed clean of soot. A lacquered linden table has been carved to follow the gentle curve of the circular tower wall, its surface covered by a woven sapphire blue table runner.
Obvious exits: none

On the linden table you see:

an oiled oak and steel graver Weight: <1 pound
analyze, show description
Analyze:
This graver is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This graver can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your oak and steel graver is currently Tier 1 (off-the-shelf). The following verbs will work with the graver:
RUB, SLAP, TOUCH

Show:
A glyph-encircled silver disk etched with an arc is inlaid into the handle of the graver.
5000
a round-handled bright faenor graver Weight: <1 pound
analyze, show description
Analyze:
This graver is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This graver can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your bright faenor graver is currently Tier 1 (off-the-shelf). The following verbs will work with the graver:
RUB, SLAP, TOUCH

Show:
A glyph-encircled silver disk etched with a hexagon is inlaid into the handle of the graver.
5000
a heavy bronze graver Weight: <1 pound
analyze, show description
Analyze:
This graver is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This graver can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your bronze graver is currently Tier 1 (off-the-shelf). The following verbs will work with the graver:
RUB, SLAP, TOUCH

Show:
A glyph-encircled silver disk etched with a circle is inlaid into the handle of the graver.
5000
a tarnished pewter burin Weight: <1 pound
analyze, show description
Analyze:
This burin is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This burin can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your pewter burin is currently Tier 1 (off-the-shelf). The following verbs will work with the burin:
RUB, SLAP, TOUCH

Show:
A glyph-encircled silver disk etched with a sphere is inlaid into the handle of the burin.
5000
an oval-handled blued steel burin Weight: <1 pound
analyze, show description
Analyze:
This burin is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This burin can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your blued steel burin is currently Tier 1 (off-the-shelf). The following verbs will work with the burin:
RUB, SLAP, TOUCH

Show:
A glyph-encircled silver disk etched with a rhombus is inlaid into the handle of the burin.
5000
a leaf-etched sharp steel burin Weight: <1 pound
analyze, show description
Analyze:
This burin is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This burin can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your sharp steel burin is currently Tier 1 (off-the-shelf). The following verbs will work with the burin:
RUB, SLAP, TOUCH

Show:
A glyph-encircled silver disk etched with a triangle is inlaid into the handle of the burin.
5000
a yew-handled gleaming steel burin Weight: <1 pound
analyze, show description
Analyze:
This burin is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This burin can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your gleaming steel burin is currently Tier 1 (off-the-shelf). The following verbs will work with the burin:
RUB, SLAP, TOUCH

Show:
A glyph-encircled silver disk etched with a square is inlaid into the handle of the burin.
5000
a sleek lilac-carved brush Weight: <1 pound
analyze, show description
Analyze:
This brush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This brush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your lilac-carved brush is currently Tier 1 (off-the-shelf). The following verbs will work with the brush:
WAVE, SLAP, TOUCH

Show:
Minute glyphs encircle the ferrule just above the bristles which are saturated with purple paint.
5000
a hog bristle brush Weight: <1 pound
analyze, show description
Analyze:
This brush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This brush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your hog bristle brush is currently Tier 1 (off-the-shelf). The following verbs will work with the brush:
WAVE, SLAP, TOUCH

Show:
Minute glyphs encircle the ferrule just above the bristles which are saturated with red paint.
5000
a gold-ferruled harlequin-motif brush Weight: <1 pound
analyze, show description
Analyze:
This brush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This brush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your harlequin-motif brush is currently Tier 1 (off-the-shelf). The following verbs will work with the brush:
WAVE, SLAP, TOUCH

Show:
Minute glyphs encircle the ferrule just above the bristles which are saturated with yellow paint.
5000
a spiral-carved white paintbrush Weight: <1 pound
analyze, show description
Analyze:
This paintbrush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This paintbrush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your white paintbrush is currently Tier 1 (off-the-shelf). The following verbs will work with the paintbrush:
WAVE, SLAP, TOUCH

Show:
Minute glyphs encircle the ferrule just above the bristles which are saturated with white paint.
5000
a gold-striped mahogany paintbrush Weight: <1 pound
analyze, show description
Analyze:
This paintbrush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This paintbrush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your mahogany paintbrush is currently Tier 1 (off-the-shelf). The following verbs will work with the paintbrush:
WAVE, SLAP, TOUCH

Show:
Minute glyphs encircle the ferrule just above the bristles which are saturated with gold paint.
5000
a thin copper-ferruled paintbrush Weight: <1 pound
analyze, show description
Analyze:
This paintbrush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This paintbrush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your copper-ferruled paintbrush is currently Tier 1 (off-the-shelf). The following verbs will work with the paintbrush:
WAVE, SLAP, TOUCH

Show:
Minute glyphs encircle the ferrule just above the bristles which are saturated with blue paint.
5000
a narrow dark green paintbrush Weight: <1 pound
analyze, show description
Analyze:
This paintbrush is a tool to mark many kinds of magical loot you may find when hunting, specifically most* of the items that wizards can recharge. It will add a very simple mark to the end of the description of your magical items, respectively a small shape for engravers and a dab of colored paint for brushes. Use with caution as the marks may nullify the item's ability to be used with other scripted items. Test first!
*There are some exclusions! If it doesn't make sense to be painted or engraved, it won't mark it. It also will not mark imbedded (420), holy receptacle (325), or imbued (614) items.
This paintbrush can be altered to have a long description or a show added, but the noun must remain the same. The show will always have a sentence appended to it describing the current setting of the tool, so keep that in mind when designing.
Your dark green paintbrush is currently Tier 1 (off-the-shelf). The following verbs will work with the paintbrush:
WAVE, SLAP, TOUCH

Show:
Minute glyphs encircle the ferrule just above the bristles which are saturated with green paint.
5000
an immaculately printed note

In the Common language, it reads:
Burins and gravers will engrave a shape on many of the magical things you may stumble upon when hunting. Paintbrushes will put a dot of paint on them. I'm told this could be useful for wizards and their clientele. LOOK at them to see what each will engrave or paint.
You may find chits to make them more versatile upon the bookshelves. They add the ability to paint in black or engrave a diamond, depending on your tool.
The upstairs is STRICTLY off-limits. Don't even try.
XOXO,
The Proprietrix

On the bookshelves you see:

a diamond-shaped linden chit painted obsidian black Weight: <1 pound
analyze, show description
Analyze:
Your chit is used to unlock the potential of things held in your other hand.
Your chit will unlock the second tier of a Wizard Marker. For an engraver, this will add a second diamond shape option and for a paintbrush, this will add a second black paint color option. FLIP the marker to switch between the two options after you use this chit.
RAISE the chit with a Tier 1 Wizard Marker in your other hand to unlock it to Tier 2.
You need only RAISE your chit while holding a compatible piece of equipment in your other hand.
Your chit may not be altered or changed in any way.

Show:
As you glance over the chit you notice something written on it...
ANALYZE me for more info. RAISE me with a Tier 1 Wizard Marker in your other hand to unlock it to Tier 2.
3000