PSFShop:Cutter Chaos

The official GemStone IV encyclopedia.
Jump to navigation Jump to search

2019

, [Map Room #10], Lich# 22486, go grease-stained wagon

Cutter Chaos, Showroom

[Cutter Chaos, Showroom - 22486]
A small overhead window filters in sunlight, highlighting the intricate network of wires running along the top of the wagon, suspending a mess of tin cans, greasy gears, and stale laundry. Massive red arrows are painted on the east wall, all pointing at some uneven metal shelves tied with frumpy yellow ribbons. In one dusty corner, a rusty metal contraption sits behind broken hat rack. Piled up on the floor, stacks of boxes teeter precariously, occluding a direct path between the entrance and a stained patchwork curtain.
Obvious exits: out

On the bottom shelf you see:

a coin-engraved golden imflass pattern Weight: <1 pound
analyze
Analyze:
This item is used exclusively for gemcutters.
It may be altered under limited circumstances.
It must be in the format of "a <shape>,<color> <metal>,pattern" like "a lion-shaped yellow steel pattern".
5000
a tower-etched ivory steel pattern Weight: <1 pound
analyze
Analyze:
This item is used exclusively for gemcutters.
It may be altered under limited circumstances.
It must be in the format of "a <shape>,<color> <metal>,pattern" like "a lion-shaped yellow steel pattern".
5000
a wagon-carved viridian laje pattern Weight: <1 pound
analyze
Analyze:
This item is used exclusively for gemcutters.
It may be altered under limited circumstances.
It must be in the format of "a <shape>,<color> <metal>,pattern" like "a lion-shaped yellow steel pattern".
5000
a tent-incised magenta iron pattern Weight: <1 pound
analyze
Analyze:
This item is used exclusively for gemcutters.
It may be altered under limited circumstances.
It must be in the format of "a <shape>,<color> <metal>,pattern" like "a lion-shaped yellow steel pattern".
5000
a torch-stamped ruddy drake pattern Weight: <1 pound
analyze
Analyze:
This item is used exclusively for gemcutters.
It may be altered under limited circumstances.
It must be in the format of "a <shape>,<color> <metal>,pattern" like "a lion-shaped yellow steel pattern".
5000

On the top shelf you see:

a bookish alum-paneled sorcerer Weight: 2 pounds
Pocketed: Very small (<2-4)
a couple of items
analyze, show description
Analyze:
This item may be altered under the following conditions: the gemcutter's form must be something humanoid with a back, a head, and an appendage that can hold something, like a hand, a claw, or paw. It must be made of metal.
The gemcutter can have both a long and a show.
Only certain patterns made specifically for gemcutters can be used with this item.
Try as you might, you cannot get a good sense of whether or not the sorcerer's pockets could get any deeper, but you might be able to have a talented merchant lighten the alum-paneled sorcerer for you.

Show:
The alum-paneled sorcerer is holding no gem, and there is no pattern set in the slot in its back.
75000
a plump olive mithglin gargoyle Weight: 2 pounds
Pocketed: Very small (<2-4)
a couple of items
analyze, show description
Analyze:
This item may be altered under the following conditions: the gemcutter's form must be something humanoid with a back, a head, and an appendage that can hold something, like a hand, a claw, or paw. It must be made of metal.
The gemcutter can have both a long and a show.
Only certain patterns made specifically for gemcutters can be used with this item.
Try as you might, you cannot get a good sense of whether or not the gargoyle's pockets could get any deeper, but you might be able to have a talented merchant lighten the olive mithglin gargoyle for you.

Show:
The olive mithglin gargoyle is holding no gem, and there is no pattern set in the slot in its back.
75000
a lanky umber invar gargoyle Weight: 2 pounds
Pocketed: Very small (<2-4)
a couple of items
analyze, show description
Analyze:
This item may be altered under the following conditions: the gemcutter's form must be something humanoid with a back, a head, and an appendage that can hold something, like a hand, a claw, or paw. It must be made of metal.
The gemcutter can have both a long and a show.
Only certain patterns made specifically for gemcutters can be used with this item.
Try as you might, you cannot get a good sense of whether or not the gargoyle's pockets could get any deeper, but you might be able to have a talented merchant lighten the umber invar gargoyle for you.

Show:
The umber invar gargoyle is holding no gem, and there is no pattern set in the slot in its back.
75000
a stocky cinerous ora gargoyle Weight: 2 pounds
Pocketed: Very small (<2-4)
a couple of items
analyze, show description
Analyze:
This item may be altered under the following conditions: the gemcutter's form must be something humanoid with a back, a head, and an appendage that can hold something, like a hand, a claw, or paw. It must be made of metal.
The gemcutter can have both a long and a show.
Only certain patterns made specifically for gemcutters can be used with this item.
Try as you might, you cannot get a good sense of whether or not the gargoyle's pockets could get any deeper, but you might be able to have a talented merchant lighten the cinerous ora gargoyle for you.

Show:
The cinerous ora gargoyle is holding no gem, and there is no pattern set in the slot in its back.
75000
a scrawny puce vultite gargoyle Weight: 2 pounds
Pocketed: Very small (<2-4)
a couple of items
analyze, show description
Analyze:
This item may be altered under the following conditions: the gemcutter's form must be something humanoid with a back, a head, and an appendage that can hold something, like a hand, a claw, or paw. It must be made of metal.
The gemcutter can have both a long and a show.
Only certain patterns made specifically for gemcutters can be used with this item.
Try as you might, you cannot get a good sense of whether or not the gargoyle's pockets could get any deeper, but you might be able to have a talented merchant lighten the puce vultite gargoyle for you.

Show:
The puce vultite gargoyle is holding no gem, and there is no pattern set in the slot in its back.
75000

, [Map Room #10], Lich# 22486, go curtain

Cutter Chaos, Workshop

[Cutter Chaos, Workshop - 28475]
Tiny chains dangle from the ceiling, suspending several metal skeletons in various states of completion. An extensive assortment of metalworking tools are haphazardly stored in steel trays set upon the stacks of boxes arranged around the workshop. Hastily scrawled design sketches have been tacked along the walls, covering up most of the space. Resting upon a wobbly, three-legged stool is a pile of sweat-stained rags.
Obvious exits: none