RWShop:Irons in the Fire/2021
a blacksmith's stall, [Map Room D], Lich #28026, go blacksmith stall
Irons in the Fire
| [Irons in the Fire - 28028] | |
| Parti-colored pennants flutter from carved aspen posts sunk in the soft ground, a tattered sailcloth overhead sheltering smoldering coals in a rock-lined fire pit. Laid out on a stump-mounted anvil, a hammer and tongs await a smithy's arrival, leather bellows and water-filled buckets close-at-hand. The distinctive smell of singed hair and burnt flesh lingers in the stall. | |
| Obvious exits: out | |
On the anvil you see: a rose-shaped branding iron, a wolf-shaped branding iron, a skull-shaped branding iron, a serpent-shaped branding iron, a chalice-shaped branding iron, a dagger-shaped branding iron, a sickle-shaped branding iron, a scarab-shaped branding iron, a gear-shaped branding iron and a paw-shaped branding iron.
a rose-shaped branding iron Weight: <1 pound
You analyze the branding iron and sense that the creator has provided the following information:
This item is a branding iron to brand horse-type mounts. It is not alterable. The iron must be heated by a fire spell before it can be used. Use POINT to do the branding. If your mount has an existing branding, you can overwrite the existing with a new one.
TURN the iron to change the branding location on the horse.
PUSH the iron to change the wording of the branding.
This iron will brand your mount on the right side of the neck, and it will look like this: He/She has a partially furled rose with a thorny stem branded on his/her right side of the neck.
Examine:
The branding iron is not hot enough to perform a branding.100 a wolf-shaped branding iron Weight: <1 pound
You analyze the branding iron and sense that the creator has provided the following information:
This item is a branding iron to brand horse-type mounts. It is not alterable. The iron must be heated by a fire spell before it can be used. Use POINT to do the branding. If your mount has an existing branding, you can overwrite the existing with a new one.
TURN the iron to change the branding location on the horse.
PUSH the iron to change the wording of the branding.
This iron will brand your mount on the right side of the neck, and it will look like this: He/She has a howling wolf superimposed over a full moon branded on his/her right side of the neck.
Examine:
The branding iron is not hot enough to perform a branding.100 a skull-shaped branding iron Weight: <1 pound
You analyze the branding iron and sense that the creator has provided the following information:
This item is a branding iron to brand horse-type mounts. It is not alterable. The iron must be heated by a fire spell before it can be used. Use POINT to do the branding. If your mount has an existing branding, you can overwrite the existing with a new one.
TURN the iron to change the branding location on the horse.
PUSH the iron to change the wording of the branding.
This iron will brand your mount on the right side of the neck, and it will look like this: He/She has a slack-jawed skull with vacant eyes branded on his/her right side of the neck.
Examine:
The branding iron is not hot enough to perform a branding.100 a serpent-shaped branding iron Weight: <1 pound
You analyze the branding iron and sense that the creator has provided the following information:
This item is a branding iron to brand horse-type mounts. It is not alterable. The iron must be heated by a fire spell before it can be used. Use POINT to do the branding. If your mount has an existing branding, you can overwrite the existing with a new one.
TURN the iron to change the branding location on the horse.
PUSH the iron to change the wording of the branding.
This iron will brand your mount on the right side of the neck, and it will look like this: He/She has a coiled serpent branded on his/her right side of the neck.
Examine:
The branding iron is not hot enough to perform a branding.100 a chalice-shaped branding iron Weight: <1 pound
You analyze the branding iron and sense that the creator has provided the following information:
This item is a branding iron to brand horse-type mounts. It is not alterable. The iron must be heated by a fire spell before it can be used. Use POINT to do the branding. If your mount has an existing branding, you can overwrite the existing with a new one.
TURN the iron to change the branding location on the horse.
PUSH the iron to change the wording of the branding.
This iron will brand your mount on the right side of the neck, and it will look like this: He/She has a wide chalice with a diamond-patterned rim branded on his/her right side of the neck.
Examine:
The branding iron is not hot enough to perform a branding.100 a dagger-shaped branding iron Weight: <1 pound
You analyze the branding iron and sense that the creator has provided the following information:
This item is a branding iron to brand horse-type mounts. It is not alterable. The iron must be heated by a fire spell before it can be used. Use POINT to do the branding. If your mount has an existing branding, you can overwrite the existing with a new one.
TURN the iron to change the branding location on the horse.
PUSH the iron to change the wording of the branding.
This iron will brand your mount on the right side of the neck, and it will look like this: He/She has a cross-hilted dagger piercing a skull branded on his/her right side of the neck.
Examine:
The branding iron is not hot enough to perform a branding.100 a sickle-shaped branding iron Weight: <1 pound
You analyze the branding iron and sense that the creator has provided the following information:
This item is a branding iron to brand horse-type mounts. It is not alterable. The iron must be heated by a fire spell before it can be used. Use POINT to do the branding. If your mount has an existing branding, you can overwrite the existing with a new one.
TURN the iron to change the branding location on the horse.
PUSH the iron to change the wording of the branding.
This iron will brand your mount on the right side of the neck, and it will look like this: He/She has a long-hafted sickle wreathed in feathers branded on his/her right side of the neck.
Examine:
The branding iron is not hot enough to perform a branding.100 a scarab-shaped branding iron Weight: <1 pound
You analyze the branding iron and sense that the creator has provided the following information:
This item is a branding iron to brand horse-type mounts. It is not alterable. The iron must be heated by a fire spell before it can be used. Use POINT to do the branding. If your mount has an existing branding, you can overwrite the existing with a new one.
TURN the iron to change the branding location on the horse.
PUSH the iron to change the wording of the branding.
This iron will brand your mount on the right side of the neck, and it will look like this: He/She has a bisected scarab with scratched wings branded on his/her right side of the neck.
Examine:
The branding iron is not hot enough to perform a branding.100 a gear-shaped branding iron Weight: <1 pound
You analyze the branding iron and sense that the creator has provided the following information:
This item is a branding iron to brand horse-type mounts. It is not alterable. The iron must be heated by a fire spell before it can be used. Use POINT to do the branding. If your mount has an existing branding, you can overwrite the existing with a new one.
TURN the iron to change the branding location on the horse.
PUSH the iron to change the wording of the branding.
This iron will brand your mount on the right side of the neck, and it will look like this: He/She has a flat gear branded on his/her right side of the neck.
Examine:
The branding iron is not hot enough to perform a branding.100 a paw-shaped branding iron Weight: <1 pound
You analyze the branding iron and sense that the creator has provided the following information:
This item is a branding iron to brand horse-type mounts. It is not alterable. The iron must be heated by a fire spell before it can be used. Use POINT to do the branding. If your mount has an existing branding, you can overwrite the existing with a new one.
TURN the iron to change the branding location on the horse.
PUSH the iron to change the wording of the branding.
This iron will brand your mount on the right side of the neck, and it will look like this: He/She has a three-toed paw branded on his/her right side of the neck.
Examine:
The branding iron is not hot enough to perform a branding.100 In the buckets you see: a dragon-shaped branding iron, a key-shaped branding iron, a turnip-shaped branding iron, a fist-shaped branding iron, a lightning bolt-shaped branding iron, a glyph-shaped branding iron, a wand-shaped branding iron, a feather-shaped branding iron, an eyeball-shaped branding iron and a flower-shaped branding iron.
a dragon-shaped branding iron Weight: <1 pound
You analyze the branding iron and sense that the creator has provided the following information:
This item is a branding iron to brand horse-type mounts. It is not alterable. The iron must be heated by a fire spell before it can be used. Use POINT to do the branding. If your mount has an existing branding, you can overwrite the existing with a new one.
TURN the iron to change the branding location on the horse.
PUSH the iron to change the wording of the branding.
This iron will brand your mount on the right side of the neck, and it will look like this: He/She has a sleeping dragon eating its tail branded on his/her right side of the neck.
Examine:
The branding iron is not hot enough to perform a branding.100 a key-shaped branding iron Weight: <1 pound
You analyze the branding iron and sense that the creator has provided the following information:
This item is a branding iron to brand horse-type mounts. It is not alterable. The iron must be heated by a fire spell before it can be used. Use POINT to do the branding. If your mount has an existing branding, you can overwrite the existing with a new one.
TURN the iron to change the branding location on the horse.
PUSH the iron to change the wording of the branding.
This iron will brand your mount on the right side of the neck, and it will look like this: He/She has a skeleton key and lock branded on his/her right side of the neck.
Examine:
The branding iron is not hot enough to perform a branding.100 a turnip-shaped branding iron Weight: <1 pound
You analyze the branding iron and sense that the creator has provided the following information:
This item is a branding iron to brand horse-type mounts. It is not alterable. The iron must be heated by a fire spell before it can be used. Use POINT to do the branding. If your mount has an existing branding, you can overwrite the existing with a new one.
TURN the iron to change the branding location on the horse.
PUSH the iron to change the wording of the branding.
This iron will brand your mount on the right side of the neck, and it will look like this: He/She has a plump turnip superimposed over arrows branded on his/her right side of the neck.
Examine:
The branding iron is not hot enough to perform a branding.100 a fist-shaped branding iron Weight: <1 pound
You analyze the branding iron and sense that the creator has provided the following information:
This item is a branding iron to brand horse-type mounts. It is not alterable. The iron must be heated by a fire spell before it can be used. Use POINT to do the branding. If your mount has an existing branding, you can overwrite the existing with a new one.
TURN the iron to change the branding location on the horse.
PUSH the iron to change the wording of the branding.
This iron will brand your mount on the right side of the neck, and it will look like this: He/She has a gauntleted fist encircled by dots branded on his/her right side of the neck.
Examine:
The branding iron is not hot enough to perform a branding.100 a lightning bolt-shaped branding iron Weight: <1 pound
You analyze the branding iron and sense that the creator has provided the following information:
This item is a branding iron to brand horse-type mounts. It is not alterable. The iron must be heated by a fire spell before it can be used. Use POINT to do the branding. If your mount has an existing branding, you can overwrite the existing with a new one.
TURN the iron to change the branding location on the horse.
PUSH the iron to change the wording of the branding.
This iron will brand your mount on the right side of the neck, and it will look like this: He/She has a lightning bolt descending from clouds branded on his/her right side of the neck.
Examine:
The branding iron is not hot enough to perform a branding.100 a glyph-shaped branding iron Weight: <1 pound
You analyze the branding iron and sense that the creator has provided the following information:
This item is a branding iron to brand horse-type mounts. It is not alterable. The iron must be heated by a fire spell before it can be used. Use POINT to do the branding. If your mount has an existing branding, you can overwrite the existing with a new one.
TURN the iron to change the branding location on the horse.
PUSH the iron to change the wording of the branding.
This iron will brand your mount on the right side of the neck, and it will look like this: He/She has an encircled warding glyph branded on his/her right side of the neck.
Examine:
The branding iron is not hot enough to perform a branding.100 a wand-shaped branding iron Weight: <1 pound
You analyze the branding iron and sense that the creator has provided the following information:
This item is a branding iron to brand horse-type mounts. It is not alterable. The iron must be heated by a fire spell before it can be used. Use POINT to do the branding. If your mount has an existing branding, you can overwrite the existing with a new one.
TURN the iron to change the branding location on the horse.
PUSH the iron to change the wording of the branding.
This iron will brand your mount on the right side of the neck, and it will look like this: He/She has a slender wand encircled by flames branded on his/her right side of the neck.
Examine:
The branding iron is not hot enough to perform a branding.100 a feather-shaped branding iron Weight: <1 pound
You analyze the branding iron and sense that the creator has provided the following information:
This item is a branding iron to brand horse-type mounts. It is not alterable. The iron must be heated by a fire spell before it can be used. Use POINT to do the branding. If your mount has an existing branding, you can overwrite the existing with a new one.
TURN the iron to change the branding location on the horse.
PUSH the iron to change the wording of the branding.
This iron will brand your mount on the right side of the neck, and it will look like this: He/She has a detailed peacock feather branded on his/her right side of the neck.
Examine:
The branding iron is not hot enough to perform a branding.100 an eyeball-shaped branding iron Weight: <1 pound
You analyze the branding iron and sense that the creator has provided the following information:
This item is a branding iron to brand horse-type mounts. It is not alterable. The iron must be heated by a fire spell before it can be used. Use POINT to do the branding. If your mount has an existing branding, you can overwrite the existing with a new one.
TURN the iron to change the branding location on the horse.
PUSH the iron to change the wording of the branding.
This iron will brand your mount on the right side of the neck, and it will look like this: He/She has a slit-pupiled eye wreathed in lashes branded on his/her right side of the neck.
Examine:
The branding iron is not hot enough to perform a branding.100 a flower-shaped branding iron Weight: <1 pound
You analyze the branding iron and sense that the creator has provided the following information:
This item is a branding iron to brand horse-type mounts. It is not alterable. The iron must be heated by a fire spell before it can be used. Use POINT to do the branding. If your mount has an existing branding, you can overwrite the existing with a new one.
TURN the iron to change the branding location on the horse.
PUSH the iron to change the wording of the branding.
This iron will brand your mount on the right side of the neck, and it will look like this: He/She has a slender daisy crossing a stick branded on his/her right side of the neck.
Examine:
The branding iron is not hot enough to perform a branding.100 In the overturned crate you see: a heart-shaped branding iron, a chevron-shaped branding iron, a crescent-shaped branding iron, a diamond-shaped branding iron, a shamrock-shaped branding iron, a triple arrow-shaped branding iron, a crown-shaped branding iron, a leaf-shaped branding iron, an x-shaped branding iron and a star-shaped branding iron.
a heart-shaped branding iron Weight: <1 pound
You analyze the branding iron and sense that the creator has provided the following information:
This item is a branding iron to brand horse-type mounts. It is not alterable. The iron must be heated by a fire spell before it can be used. Use POINT to do the branding. If your mount has an existing branding, you can overwrite the existing with a new one.
TURN the iron to change the branding location on the horse.
PUSH the iron to change the wording of the branding.
This iron will brand your mount on the right side of the neck, and it will look like this: He/She has a pair of interlocking hearts branded on his/her right side of the neck.
Examine:
The branding iron is not hot enough to perform a branding.100 a chevron-shaped branding iron Weight: <1 pound
You analyze the branding iron and sense that the creator has provided the following information:
This item is a branding iron to brand horse-type mounts. It is not alterable. The iron must be heated by a fire spell before it can be used. Use POINT to do the branding. If your mount has an existing branding, you can overwrite the existing with a new one.
TURN the iron to change the branding location on the horse.
PUSH the iron to change the wording of the branding.
This iron will brand your mount on the right side of the neck, and it will look like this: He/She has a down-pointed bastard sword with scarves enrcircling the hilt branded on his/her right side of the neck.
Examine:
The branding iron is not hot enough to perform a branding.100 a crescent-shaped branding iron Weight: <1 pound
You analyze the branding iron and sense that the creator has provided the following information:
This item is a branding iron to brand horse-type mounts. It is not alterable. The iron must be heated by a fire spell before it can be used. Use POINT to do the branding. If your mount has an existing branding, you can overwrite the existing with a new one.
TURN the iron to change the branding location on the horse.
PUSH the iron to change the wording of the branding.
This iron will brand your mount on the right side of the neck, and it will look like this: He/She has a leaping fawn encircled by leaves branded on his/her right side of the neck.
Examine:
The branding iron is not hot enough to perform a branding.100 a diamond-shaped branding iron Weight: <1 pound
You analyze the branding iron and sense that the creator has provided the following information:
This item is a branding iron to brand horse-type mounts. It is not alterable. The iron must be heated by a fire spell before it can be used. Use POINT to do the branding. If your mount has an existing branding, you can overwrite the existing with a new one.
TURN the iron to change the branding location on the horse.
PUSH the iron to change the wording of the branding.
This iron will brand your mount on the right side of the neck, and it will look like this: He/She has an open hand with an eyeball in the palm branded on his/her right side of the neck.
Examine:
The branding iron is not hot enough to perform a branding.100 a shamrock-shaped branding iron Weight: <1 pound
You analyze the branding iron and sense that the creator has provided the following information:
This item is a branding iron to brand horse-type mounts. It is not alterable. The iron must be heated by a fire spell before it can be used. Use POINT to do the branding. If your mount has an existing branding, you can overwrite the existing with a new one.
TURN the iron to change the branding location on the horse.
PUSH the iron to change the wording of the branding.
This iron will brand your mount on the right side of the neck, and it will look like this: He/She has a pot-bellied pipe issuing a wisp of smoke branded on his/her right side of the neck.
Examine:
The branding iron is not hot enough to perform a branding.100 a triple arrow-shaped branding iron Weight: <1 pound
You analyze the branding iron and sense that the creator has provided the following information:
This item is a branding iron to brand horse-type mounts. It is not alterable. The iron must be heated by a fire spell before it can be used. Use POINT to do the branding. If your mount has an existing branding, you can overwrite the existing with a new one.
TURN the iron to change the branding location on the horse.
PUSH the iron to change the wording of the branding.
This iron will brand your mount on the right side of the neck, and it will look like this: He/She has a trio of crossed arrows with broad fletchings branded on his/her right side of the neck.
Examine:
The branding iron is not hot enough to perform a branding.100 a crown-shaped branding iron Weight: <1 pound
You analyze the branding iron and sense that the creator has provided the following information:
This item is a branding iron to brand horse-type mounts. It is not alterable. The iron must be heated by a fire spell before it can be used. Use POINT to do the branding. If your mount has an existing branding, you can overwrite the existing with a new one.
TURN the iron to change the branding location on the horse.
PUSH the iron to change the wording of the branding.
This iron will brand your mount on the right side of the neck, and it will look like this: He/She has a three-masted sloop branded on his/her right side of the neck.
Examine:
The branding iron is not hot enough to perform a branding.100 a leaf-shaped branding iron Weight: <1 pound
You analyze the branding iron and sense that the creator has provided the following information:
This item is a branding iron to brand horse-type mounts. It is not alterable. The iron must be heated by a fire spell before it can be used. Use POINT to do the branding. If your mount has an existing branding, you can overwrite the existing with a new one.
TURN the iron to change the branding location on the horse.
PUSH the iron to change the wording of the branding.
This iron will brand your mount on the right side of the neck, and it will look like this: He/She has an aspen leaf encircled by whorls branded on his/her right side of the neck.
Examine:
The branding iron is not hot enough to perform a branding.100 an x-shaped branding iron Weight: <1 pound
You analyze the branding iron and sense that the creator has provided the following information:
This item is a branding iron to brand horse-type mounts. It is not alterable. The iron must be heated by a fire spell before it can be used. Use POINT to do the branding. If your mount has an existing branding, you can overwrite the existing with a new one.
TURN the iron to change the branding location on the horse.
PUSH the iron to change the wording of the branding.
This iron will brand your mount on the right side of the neck, and it will look like this: He/She has the letter 'X' branded on his/her right side of the neck.
Examine:
The branding iron is not hot enough to perform a branding.100 a star-shaped branding iron Weight: <1 pound
You analyze the branding iron and sense that the creator has provided the following information:
This item is a branding iron to brand horse-type mounts. It is not alterable. The iron must be heated by a fire spell before it can be used. Use POINT to do the branding. If your mount has an existing branding, you can overwrite the existing with a new one.
TURN the iron to change the branding location on the horse.
PUSH the iron to change the wording of the branding.
This iron will brand your mount on the right side of the neck, and it will look like this: He/She has an eight-pointed star superimposed over an arachnid branded on his/her right side of the neck.
Examine:
The branding iron is not hot enough to perform a branding.100