Fletching

Fletching is the art of creating arrows, bolts, and darts for use in combat. This guide is here to help you on your way to being a successful master of the art of Fletching.

Tools

This is a list of the tools available in Fletching. Some tools are required, others are not.

Required

• A handaxe-based OHE weapon
• A dagger-based OHE weapon or hook-knife based brawling weapon
• A short, composite or long bow for arrows
• A light or heavy crossbow for light or heavy bolts
• A completed dart for darts

Optional

• A drill
• A fletching razor
• A scriber

Materials

This is a list of the available Materials used in Fletching. Some materials are required, while others are not.

Required

• A source of wood
• Fletching glue
• Fletchings

Optional

• Paint
• Paintsticks
• Arrowheads
• Caps

Tools Guide

This section is a more in depth look at each tool available in fletching. As mentioned earlier, some tools are required while others are not. Each tool is described in detail to help you on your way. These tools are available at your local fletching shop and weapon shop.

Handaxe

The handaxe is an OHE based weapon used to pare down an item made of wood to create the shafts needed to make your projectile. There are four current possible projectiles created from fletching: Arrow, Light Crossbow Bolt, Heavy Crossbow Bolt, and Dart. Any OHE weapon that INSPECTs as a handaxe base weapon should be compatible for fletching.

Dagger

The dagger is an OHE based weapon that is used for more fine and precise tasks not possible with a handaxe. Paring the shaft down further, cutting nocks in the end of the arrow, making the projectile the proper length, and whittling a tip are all steps requiring the use of the dagger. Any OHE weapon that INSPECTs as a dagger base weapon should be compatible for fletching.

Bow, Crossbow, or Dart

A Ranged weapon is used in the fletching process in order to measure the proper length of the projectile. Current ranged weapons include: Short, Composite, and Long Bows, Light and Heavy Crossbows. A completed Dart is required to measure the correct length of a dart shaft.

Fletching Razor

The fletching razor is a tool that cuts fletchings from feathers found from creatures in the wilds of Elanthia. Though fletchings are easily purchased from the local fletching shop, the fletching razor allows the Fletcher to customize their arrows with fletchings not available in your local shop. Make sure that your fletching razor is OPEN so that you can use it.

Drill

The drill is a tool used to make a hole in the end of the projectile, which allows it to receive an arrowhead. Arrowheads are not required for a fletching projectile to work, but allows the Fletcher customize an arrow to their liking.

Scriber

There are other tools around Elanthia to further improve your enjoyment of fletching. Scribers are used to etch different designs into the wood of your projectile. There are even rare scribers that can etch your name.

Other Tools

There are also other various items and tools that have been released throughout Elanthia. Keep your eyes peeled and you never know what you may find.

Materials Guide

Now that you know what tools you need and what they are used for, lets get familiar with the Materials that you will need. As mentioned earlier, some materials are required while others are not. Each material is detailed below to help you.

Wood

The first and most important material required is the wood material needed to make the projectile. There are several different kinds of woods available for fletching, from a variety of sources. Your two main sources of wood will either be plain wood or magical wood.

Plain Wood

Plain wood is the most frequent and easily attainable material that you can get your hands on. You can get plain wood by purchasing them from town fletching shops or FORAGEing for them in the wilds. Certain creatures also can provide a skin that can be used as a shaft material, mainly bones. You even have the option of purchasing large pole-arm weapons that you can cut down into shafts as well, just visit your local weapon shop to see their selection. (See: List of Woods and Skins Usable for a list of non-purchased base materials.)

Magic Wood

Magic woods are woods that have inherent bonuses in them that can be used to increase your Ranged AS. Click on the material in the table below to see applicable information about each one. You can also refer to the Materials Guide on the GemStone IV website if any of the information happens to be missing.

Unfortunately, these woods can only be purchased either by having back-room access at town fletching shops, or by traveling/event merchants.

Below is a table showing you the different woods available at town fletching shops. These woods come in three sizes: stick (S), branch (B), or limb (L), where stick is the smallest and limb is the largest.

Wood, Offensive Bonus

Landing

Solhaven

Ice Mule

Ta'Vaalor

Sylvarraend

River's Rest

Teras Isle

S

B

L

S

B

L

S

B

L

S

B

L

S

B

L

S

B

L

S

B

L

Carmiln, +6

X

X

X

X

X

Deringo, +8

X

X

X

X

X

X

X

Faewood, +20

X

X

X

X

X

X

X

X

X

X

Ironwood, +0

X

X

X

X

X

X

X

X

X

X

X

X

Kakore, +10

X

X

X

X

X

X

X

X

X

X

X

X

X

Mesille, +15

X

X

X

X

X

X

X

X

Mossbark, +15

X

X

X

X

X

X

X

X

X

Rowan, +5

X

X

X

X

X

X

X

X

X

X

X

X

X

X

Villswood, +18

X

X

X

X

X

X

X

X

X

X

Fletchings

Another essential material needed are fletchings. Fletchings are glued to the back of the projectile to ensure a true and steady flight to its target. Without fletchings, the arrow would become very inaccurate and useless. Fletchings can be purchased from the local fletching shop or made from creature feathers by way of a fletching razor.

Animal (level):	Location:	Feather:	Fletching:	Appearance:	Abilities:
lost penguin chick (mascot)	Icemule Trace: wanders	a soft grey penguin feather	penguin fletchings		none
cockatrice (6)	Upper Trollfang	a cockatrice feather	cockatrice fletchings	<projectile> fletched with snowy-white cockatrice feathers	none
plumed cockatrice (13)	Ta'Vaalor	a cockatrice plume	cockatrice fletchings	<projectile> fletched with snowy-white cockatrice feathers	none
snowy cockatrice (6)	Icemule Trace: South Gate	a snowy cockatrice tailfeather	cockatrice fletchings	<projectile> fletched with snowy-white cockatrice feathers	none
black-winged daggerbeak (1)	Solhaven: Caravansary	a daggerbeak wing	daggerbeak fletchings	<projectile> fletched with dull black feathers	none
blood eagle (7)	River's Rest: Citadel & Town Environs	blood red eagle feather	blood red eagle fletchings	<projectile> fletched with blood red feathers	none
storm griffin (73)	Ta'Illistim: Skull Temple	a soft blue griffin feather	blue griffin fletchings	<projectile> fletched with blue griffin feathers	lightning flares
dreadnought raptor (43)	Ta'Illistim: Gyldemar Green	a ruff of raptor feathers	raptor fletchings	<projectile> fletched with glossy black raptor feathers	none
raven (mascot)	Wehnimer's Landing: Ravenswood neighborhood	raven's feather	jet black fletchings	<projectile> fletched with blue griffin feathers	none
colossus vulture (34)	Ta'Illistim: Sylvarraend		black vulture fletchings	<projectile> fletched with black vulture feathers	none

Fletching Glue

You need a way to attach those fletchings to the projectile, right? Well, a nice, "tasty" bottle of fletching glue is the answer. Fletching glue is available at your local fletching shop.

Paint

Tired of that dull, "wood" look? Spice up your arrows with some color! The local fletching shops have a variety of colored vials of paint available all the time for your hearts content. Other rare colors can be found from the treasure system or purchased from special merchants throughout the year.

(Note: Painting the projectile with vials of paint coats the entire shaft. The color should show up in the description of the arrow or the show description if applicable.)

Paintsticks

Want to add just a band of color to your arrow, or add a band of color over top of your current arrow color? Well, a paintstick is what you are looking for. Using a paintstick will add a small band of color near the end of the arrow. You can add a maximum of two color bands, of the same or different colors. As with paints, a paintstick can be purchased at the local fletching shops, found from the treasure system, or purchased from special merchants.

(Note: Painting the projectile with a paintstick will NOT paint the entire shaft. This will also affect the GATHER verb, as you will not be able to use the paintstick band color as a means of gathering the arrow. Example: a blue faewood arrow can be gathered by using the syntax: gather blue arrow. A blue-banded faewood arrow can be gathered by using the syntax: gather faewood arrow. Other help with the GATHER verb will be provided in the Fletching Commands Section.)

Arrowheads and Caps

Annoyed with those wimpy-looking tips that you whittle at the end of your arrow or bolt? An arrowhead or cap is just the right thing for you. When using an arrowhead, you will need a drill to make a hole. If using a cap, just screw it on to the end of the shaft. Arrowheads and caps can be purchased from your local fletching shop, with various materials at your disposal. There are also arrowheads and caps that can be obtained from special merchants as well. Arrows can only accept arrowheads, while Darts can only accept caps. Bolts, however, can accept either an arrowhead or cap, which is up to the Fletcher to decide.

Fletching Walk-Through

Tools? Check. Materials? Check. Ready to get started? Check. Now that you have your tools and materials, it is time to begin your journey in the art of fletching. This portion of the guide is an extensive walk-through to help you create projectiles step-by-step.

Making Shafts

Cutting the rough shafts from a source of wood. This step is required for arrows, bolts, and darts.

Tools and Materials required: a source of wood and a handaxe-based OHE

With a source of wood in your right hand, and a handaxe in your left, enter the command:

• CUT <PROJECTILE> FROM MY <WOOD> WITH MY <HANDAXE>

Example: cut arrows from my branch with my handaxe, cut heavy bolts from my log with my hatchet.

This command will take the source of wood and cut it into several shafts of the specified projectile style. The amount of shafts created is somewhat random. Larger sources of wood will provide you with larger quantities of shafts.

This step is not required before every projectile, as this step provides you with several rough shafts for use. It may be preferred to cut several sources of wood in succession to create large bundles at once for ease of use.

Paring the Shaft

Whittling the rough projectile down to size. This step is required for arrows, bolts, and darts.

Tools and Materials required: a single rough shaft and dagger-based OHE

With a single rough shaft in your right hand and a dagger in your left, enter the command:

• CUT MY SHAFT WITH MY <DAGGER>

This command will take the rough shaft and whittle it down to its general shape for use. Skilled fletchers should see a very straight and smooth shaft, while unskilled fletchers may create wavy and curved shafts. High quality shafts will see an increased AS bonus when completed, while low quality shafts will see a negative AS bonus.

Applying Paint

Painting the projectile to your desired color scheme. This step is optional for arrows, bolts, and darts. If you do not wish to paint your shaft with any paint, please skip on to the next step.

Tools and Materials required: a projectile shaft and a vial of paint or paintstick

With a projectile shaft in your right hand, and a vial of paint or paintstick in your left, type the command:

• PAINT MY SHAFT WITH MY <PAINT/PAINTSTICK>

This command will either paint the entire shaft if you are using a vial of paint, or add a band of paint if you are using a paintstick. If you want to paint the entire shaft a particular color, this must be done before any bands are painted on. Once applying the paint or band of paint to the shaft, you will have to wait for the paint to dry before continuing on. A quick LOOK at the shaft will tell you if the paint is dried or not. There is also an in-game message indicating when the paint is dry.

Nocking the Shaft

Nocking the end of the shaft for placement in a bow. This step is required for arrows only. If you are making a Bolt or Dart, please skip on to the next step.

Tools and Materials required: a projectile shaft and a dagger-based OHE

With a projectile shaft in your right hand and a dagger in the left, type the command:

• CUT NOCKS IN MY SHAFT WITH MY <DAGGER>

This command cuts a slot at the end of the shaft where the bowstring will be placed when reaching back to fire.

Measuring the Shaft

Measuring the shaft for correct length. This step is required for arrows, bolts, and darts.

Tools and Materials required: a projectile shaft and a bow, crossbow, or dart used for measuring.

With a projectile shaft in your right hand, and a bow, crossbow or dart in your left, type the command:

• MEASURE MY SHAFT WITH MY <BOW, CROSSBOW OR DART>

This command uses your bow, crossbow or dart to measure the correct length of your shaft. For arrows you can use a short, composite or long bow for measurement. The arrow will be able to work with all three bow types. For bolts, you must measure it using either a light crossbow for light bolts, or heavy crossbow for heavy bolts. The light/heavy crossbow must be cocked in order to measure the bolt correctly. Darts can only be measured by using another completed dart to get the correct measurement.

Cutting the Shaft to Length

Cutting the shaft down to the length that was measured. This step is required for arrows, bolts, and darts.

Tools and Materials required: a projectile shaft and a dagger-based OHE.

With a projectile shaft in your right hand and a dagger in your left, type the command:

• CUT MY SHAFT WITH MY <DAGGER>

This command will take the dagger and cut your shaft to the length measured in the previous step.

Applying the Fletchings

Attaching fletchings to the end of your projectile. This step is required for arrows, bolts and darts.

Tools and Materials required: a projectile shaft, fletching glue and fletchings.

(Note: You are required to use three fletchings to attach to the end of the arrow. Remove a bundle of three fletchings and then attach them)

With a projectile shaft in your right hand and a bottle of fletching glue in your left, type the command:

• PUT MY GLUE ON MY SHAFT

This command will apply a small amount of glue to the end of your arrow, bolt or dart. The glue is used to apply the fletchings and keep them in place on your projectile. Quickly stow your glue away and then remove three fletchings.

With a projectile shaft in your right hand and a bundle of fletchings in your left, type the command:

• PUT MY FLETCHING ON MY SHAFT

This command will make you apply the fletchings to the glue that is on the shaft. If you do not attach the fletchings quickly after applying the glue, you run a chance of the glue drying before you can put them on. Once the fletchings are attached to the projectile, you will have to wait for the glue to dry before moving on to the next step. A quick LOOK at the shaft will tell you if the glue is dried yet. There will also be in-game messaging to indicate when the glue is dry.

Making the Tip

Finally, yet importantly, you need to sharpen the other side of the arrow so that you may pierce that annoying Troll in plate armor. This step is divided into two sections. The first section is for whittling the end of the shaft to a point, while the other section is for adding an arrowhead or cap to the end of the arrow, bolt, or dart.

Whittle the Tip

Whittling the end of the shaft to a point to complete your project. This step is required for arrows, bolts or darts.

Tools and Materials required: a projectile shaft and a dagger-based OHE

With a projectile shaft in your right hand and a dagger in your left, type the command:

• CUT MY SHAFT WITH MY <DAGGER>

This command will make you whittle the end of the shaft to a point, therefore completing your projectile shaft into the specified projectile style: arrow, light/heavy bolt or dart.

The point obtained after this step will tell the quality of the arrow or bolt.

Attach Arrowhead or Cap

Drilling a hole in the end of the projectile shaft to accept an arrowhead or screwing on the cap. If you are using a cap, you do not need to drill a hole in the end of the shaft. Skip ahead past the drill portion of this step and remove your cap to put it on.

Tools and Materials required: a projectile shaft, dril, and an arrowhead.

With a projectile shaft in your right hand and a drill in your left, type the command:

• TURN MY DRILL

This command will place your drill at the end of the shaft, and drill a hole suitable for accepting an arrowhead. Stow your drill away and then remove an arrowhead.

With a projectile shaft in your right hand and an arrowhead/cap in your left, type the command:

• TURN MY ARROWHEAD/CAP

This command will then make you screw your arrowhead in the shaft or screw your cap onto the end of the shaft until it is nice and tight. Once the arrowhead or cap is attached completely, your projectile is now a completed arrow, light/heavy bolt or dart.

Additional Steps

Once your projectile is completed, there are a few additional options that you can do to it. If you own a scriber, you can now use it by RUBing it on your projectile for your desired effect, whether it be symbols or your name. There are also several different items throughout the game that interact with completed projectiles, but of course are optional. Now stow away your projectile and start over with a new one. Enjoy the art of fletching!

Fletching Commands

There are a few commands that any Fletcher should be familiar with. Each of these verbs will be explained below, but you can also find out even more details about each of these verbs in-game. Just type in the command prompt: <verb> help.

Bundle

The BUNDLE verb is one that any Fletcher or skinner is very familiar with. Instead of having fifty separate arrows sitting in a container, you can use the BUNDLE verb to collect them all together. If there are several of your arrows on the ground, you can also make use of the GATHER verb, which will bundle all the arrows into a bundle that you can then add to an existing bundle of arrows in a container.

Flip

The FLIP verb allows the Fletcher to customize the order in which the material, color, and projectile style look. For example, you can have your arrow look like this: a forest green faewood arrow, or a faewood hunter green arrow, etc...

Gather

The GATHER verb allows the Fletcher to collect identical arrows from the ground at once and bundle them together in one action. This saves the user from having to pick up each individual arrow separately and stow away.

Glance

The GLANCE verb is a tool to help you know your status with the FLIP verb. Can’t remember how many times you flipped the arrow, bolt, or dart. A quick GLANCE will solve that.

FAQS

This section of the guide has a few FAQS and the answers to them.

1. I just started fletching, and I cannot seem to make an arrow/bolt/dart to save my life. I always seem to mess up. What am I doing wrong?
   • When you begin the art of fletching, you are going to be unskilled. Through practice, you will gain fletching ranks and become more skilled in this craft.
2. What are “fletching ranks”?
   • Fletching ranks, or Artisan Ranks, are an in-game way of showing your abilities in the art of an Artisan skill. There are a total of 500 total ranks in fletching, with 500 ranks meaning that you are a Master Fletcher.
3. How do I find out how many “ranks” in fletching I have?
   • You can find out how many ranks you have with the ARTISAN SKILL command.
4. How do I know when I have gained a “rank” in fletching?
   • There is an in-game message that notifies you when you have earned a rank. You will know it when you see it.
   • That was a little easier. Perhaps you are growing more skillful?
5. I have been making arrows/bolts/darts, but they do not want to bundle even though they look the same. What gives?
   • Some arrows/bolts may have inherent differences not seen by the player. This common occurrence will happen throughout your fletching career. Though it is annoying, you can look forward to this not happening when you begin to make master quality arrows/bolts, when each arrow/bolt will be the same in every way. Darts however cannot be bundled.
6. I have heard that arrows/bolts/darts made by a master Fletcher have a bonus of some sort, what kind of bonus is there?
   • Every arrow/bolt/dart made from fletching will have a bonus, whether it is a negative or positive one. Poorly made arrows/bolts/darts can have a -5 bonus to your AS, while a master-fletched arrow/bolt/dart will carry a +5 bonus to AS. Other arrows/bolts/darts will have a bonus somewhere in between. This bonus is stacked on top of any bonus provided by materials used to make the arrow.
7. You mentioned that materials can also add an AS bonus, what materials do what and how exactly does it work?
   • A bonus to your AS can be determined by the enchant bonus of the wood you use, or the enchant bonus of the metal you use for the arrowhead or cap. To find out what materials give what bonuses, please refer to the materials guide from the main web site to see your options. Please note that if an enchanted wood is combined with an enchanted arrowhead or cap, that these enchant bonuses do not stack. The fletching system will use the greater enchant of the two materials and use that as the normal bonus. When using a faewood arrow (+20 bonus) with an imflass arrowhead (+12 bonus), only the +20 bonus of the faewood will be used. If this arrow is made by a master, it will have an added bonus of +5 since the master bonus "stacks" with the enchant bonus, making the arrow +25.
8. What about the enchant bonus of the bow/crossbow? Does that stack with the bonus of the arrow?
   • Yes, the enchant bonus of the bow/crossbow will stack with the arrow. The combined bonus, however, will never exceed +50.
9. I have talked with a few fletchers, and some have told me not to bother with expensive materials. They say to use plain wood and have your arrows “e-bladed”. What does “e-bladed” mean?
   • “E-Bladed” is referring to the Minor Elemental spell Elemental Blade (411). Specifics of this spell are in the spells section of the Gemstone web site. The spell will be prepared and cast at your bundle of arrows/bolts. Depending on the casters skill and ATTUNEment, your bundle will receive a set of “charges”. These “charges” add a +20 bonus to the AS of the arrow and adds a chance of an elemental flare to go off. The flare is determined either by the ATTUNEment of the caster or by random chance. A glance at the bundle will show you a color of light, with the color corresponding to a particular type of flare.
   • You can have a bundle of arrows/bolts with a maximum of 100 qty, and a bundle of arrows/bolts can hold a maximum of 999 charges of 411. When you remove an arrow/bolt from the bundle, two charges will go with it. When you fire the arrow/bolt and successfully use up a charge, there will be one charge remaining in the arrow/bolt. The reason for this, is so that when you pick the arrow/bolt back up, you will be able to return it to the bundle. If both charges are used, the arrow/bolt will not be able to return to the bundle because it is no longer the same in every way as the arrows in the bundle.
   • Blessing arrows for use against undead work in the same manor as E-blading, but does not add an AS bonus to the arrow/bolt.
10. I fired my arrow/bolt and something strange happened. The game said it “was lost in the local environs”. What does that mean?
    • Several things can cause this to happen, but when that message appears, your arrow/bolt is hidden somewhere in the room. Doing a quick SEARCH should help you find your lost ammunition.
11. Ok, what do I do now? I fired my arrow/bolt and I got the message "streaks off into the distance". I searched for it but could not find it. What is the deal?
    • In this situation, your arrow/bolt is lost forever. This mechanic is in place to simulate how a projectile can sometimes go somewhere that you cannot find for whatever reason. Do not bother searching, you will not find it.
12. Ok, now I am confused. After attacking a creature, my arrows are on the ground but I cannot pick them up. I can tap them, poke at them, even drag them to another room, but cannot pick them up. I get the message “out of reach”. What is going on now?
    • In this situation, you are falling victim to another game mechanic. Not being able to pick up the arrow/bolt because it is out of reach is to simulate distance between you and the arrow. If you fired an arrow/bolt 20 feet away from you, it does not make much sense for you to be able to pick it up immediately. Conversely, it does not make much sense to be able to interact with it in other ways, like dragging it, but not be able to pick it up. This mechanic is somewhat buggy, but there really is no easy way to fix it. Just something you will have to deal with for now.
13. I made my arrow/bolt with all this nifty stuff, but when I finished the arrow all of it was gone, where did it go?
    • When making an arrow/bolt, you can only take up 98 total characters of space before the arrow changes from a long description to a show description. Be sure to remember that even spaces count as characters as well. Try LOOKing at your arrow, and all your work should be there.
14. Some fletchers I've met have arrows that occasionally produce a lightning flare. How do they do that?
    • The lightning flares can be produced by making the arrows using blue griffin fletchings. A blue griffin fletching can be obtained by killing a storm griffin — if you're actually skilled enough to kill a storm griffin — or can be purchased from some player shops.
15. Do you have the list of the qualities?
    • Why, yes! I do, heh. Not necessarily in this order since it's a guess so far.. barely serviceable, crude, rough, average, decent, very serviceable, relatively sharp, extremely sharp and perfect.

Experience

Experience can now be gained from you work in fletching. You can gain experience in two ways.

• Each and every time you gain a rank in fletching, you'll also gain experience in the amount equal to the rank you just earned. For example, when you earn your first rank of fletching, you'll also receive 1 point of experience. When you earn your 458th rank of fletching, you'll earn 458 experience points.

• Another way to earn experience from fletching won't happen till you reach the rank of Master, which is 500 total ranks in fletching. Once you are a master fletcher, any projectile you complete will yield you 5 experience points. There is, however, a cap on the amount of experience you can gain for a particular time period by completing arrows as a master.

• Note: This is only true if Fletching is your only artisan skill. Reference Artisan Skill Experience to see the complete details.

Notes

• NOTE: you get fame also for each rank you go up, depending on how many fletching ranks you have already.

Finished Product Examples

This arrow has been crafted from dark green faewood. A single colored band of black encircles the back end of the arrow. At the very back end, glossy black raptor fletchings stand out and ensure a steady flight towards its target. At the business end of the arrow, a steel triangle-bladed arrowhead glints in the ambient light. You also notice a small enchanter's glyph. There appears to be something written on it. In the Common language, it reads: Scribed into the shaft is the personal mark of XXXXXX.

Reference Links

Archery Shop Listing from Keelty's Glade - out of date, web page no longer exists. please post a replacement or backup page.

Official Simutronics Guide - This is somewhat out of date because it does not include the most recent changes to fletching.