Enchant (925)/Enchant Item (925) (old version)
| ||||||||||||||||||||||||||||||||||||||||||||||||
|
One of the oldest and most coveted abilities of a wizard is the Enchant Item spell. Successfully enchanting a weapon, shield, armor, runestaff, or the rare defensive bonus item will add a permanent bonus to that item's performance in combat. This bonus adds directly to a character's offensive or defensive combat values, beyond that which is achievable by any other means.
Items may be enchanted more than once, increasing the overall bonus with each successive enchantment. Each level of enchantment bestows the item with a +5 bonus from its previous state, to a maximum of +50. Certain materials may possess natural bonuses or natural negatives.
Components
- Knowledge of Enchant Item (925) spell and sufficient mana (25) to cast it.
- Can either be storebought, or produced through the Alchemy guild skill (the recipes are Wizard only). There is no advantage to one source over the other.
- Generally, a weapon, shield, or piece of armor with no other special properties (excepting forging bonuses).
- A workshop is not required, but highly recommended for successful enchantments, particularly at higher enchantment levels or for lower level wizards. There is one located in each of the Wizard Guilds, though workshops are also found all over Elanthia. Many are hidden throughout the lands, most Great Houses boast a workshop, and a few exceedingly lucky wizards own their own workshop. Wizards who are not testing their limits, however, often do just fine at a regular earthnode.
- Also not a requirement, rather a potential source of penalties. If you have a familiar in the lands, have it with you when casting this spell.
Selecting an Item to Enchant
It is imperative that one is familiar with the item they intend to enchant. Certain materials may resist this process, or restrict it altogether. Many materials possess their own natural bonuses or negatives, which factor into the level of enchantment intended to be bestowed upon it. Properties of items such as flaring, weighting or padding will prevent them from being enchanted, as well. Some items may not take enchants, seemingly for no reason whatsoever. The best way to obtain detailed information about an item is to have a bard loresing to it. Other sources, such as the AI crystal can also provide valuable information about items. Wizards may cast Elemental Detection (405) upon items which have been previously tempered to determine their current level of enchantment.
- In general, any weapon, shield, armor, or runestaff can be enchanted as long as its other properties do not preclude the possibility.
- Flaring weapons of any type cannot be enchanted.
- Damage or crit weighted weapons of any type cannot be enchanted.
- Damage or crit padded armors, as well as those with resistance factors of any type, cannot be enchanted.
- Claidhmores cannot be enchanted due to their built-in crit weighting.
- Items with a current enchantment of +46 or higher also cannot be enchanted.
- "Defender" weapons (which provide a DS bonus as well as an AS bonus) cannot be enchanted.
- Weapons with forging bonuses, but no other special abilities, are enchantable.
- Items with enhancive properties or sanctified require special Pre-tempering potions to be enchanted. The difficulty of enchanting enhancive items varies depending on the type and intensity of the enhancive.
- Items which are blessable are generally also enchantable. However, they cannot be enchanted while blessed.
- There are extremely rare defensive bonus clothing and jewelery items which can store an enchantment.
- The only sure way to determine whether or not an item will accept an enchantment, is to try to pour a tempering potion on it. (However, Bless Item (304) comes very close.)
- Each wizard may only have one Major Enchant project in progress at a given time. This includes any further enchantment upon an item which is already +16 or higher.
The Enchanting Process
Enchanting is a simple two-step process. First, the object is tempered with a potion. The temper takes a certain amount of time to cure, and once complete, one then casts the Enchant Item spell upon the object. This "pour/cast" cycle is then repeated once for each level of enchantment being bestowed upon the item. For example, taking an item from 0x to 1x would require one pour and then one cast. Likewise, taking an item from 2x to 3x would require three pours and three casts total. During the intermediary processes, the item cannot be used for its usual function. Wielding a weapon, shield, or runestaff, or being struck while wearing armor whose enchantment has not yet been completed will cause the destruction of that item.
Tempering the Item
Tempering is the act of using an enchanting potion to prepare an object to store the enchantment you wish to instill within. The act itself is quite simple, though making certain you have checked the status of each contributing factor and conditioned the variables in your favor can prove quite challenging.
- POUR POTION ON MY {ITEM} : initiates the tempering process
- Each pour will use precisely one dose of potion, regardless of the size or type of the item.
- There is a 20 second roundtime for each pour. (The spell Haste (506) will not have an effect on this roundtime)
Certain items, such as sanctified gear and enhancive items, require Pre-tempering potions prior to the tempering potion to take each step of the enchant.
- Failure due to insufficient potion
There does not seem to be enough dirtokh potion to cover the green imflass mail. The liquid bubbles slightly as it touches the surface of the green imflass mail, but then merely evaporates without effect.
Note that this message may now be obsolete, as previously two doses were required for each pour if the item was classified as a shield or as armor. Only one dose is now required regardless of the item; this has been true since just before the 2007 Ebon Gate Festival.
- Unsuccessful pour
- Successful pour
1d100: 33 + Modifiers: 234 == 267
As the liquid coats the surface of the green imflass mail, a misty aura fills the air surrounding it, dancing around your fingers as you gesture over it with a soft incantation spilling from your lips. Small runic symbols flare to life at various points along the surface of the mail, their blurry edges wavering in response to the cadence of your voice and the liquid in these areas absorbing quickly beneath the surface. When the last of the liquid has vanished, the symbols dissipate and the mail appears faded. You scrutinize the green imflass mail, notice nothing amiss, and conclude that the tempering seems to have been successful. You estimate that the green imflass mail should be ready to enchant in about 8 to 9 days.Note: encumbrance does affect pouring as well. On a wizard with a base "Modifiers" of 152, the weight of double leathers (once encumbrance was incurred) reduced the modifiers by six per leathers.
If your enchanting project requires multiple castings, you may pour the next temper immediately after casting. There is no waiting period (other than roundtime incurred by the casting itself).
Determining the Proper Potion
Starting Bonus of Item | Starting Enchantment Level | Aura Color | Destination Bonus of Item | Destination Enchantment Level | Pour/Cast Cycles Required | Average Tempering Time Per Cycle* | Appropriate Tempering Potion | Potion Cost † |
---|---|---|---|---|---|---|---|---|
< 0 | None | Special | Varies | Varies | 1 | Varies | Varies | Varies |
0 | 0x | None | +1 to +5 | 1x | 1 | 1 day | Rohnuru | 3500 |
+1 to +5 | 1x | Red | +5 to +10 | 2x | 2 | 2 days | ||
+6 to +10 | 2x | Orange | +11 to +15 | 3x | 3 | 3 days | Duqnuru | 5500 |
+11 to +15 | 3x | Yellow | +16 to +20 | 4x | 4 | 4 to 5 days | ||
+16 to +20 | 4x | Green | +21 to +25 | 5x | 5 | 5 to 7 days | Dirtokh | 10,000 |
+21 to +25 | 5x | Blue | +26 to +30 | 6x | 6 | 6 to 9 days | ||
+26 to +30 | 6x | Indigo | +31 to +35 | 7x | 7 | 8 to 11 days | Mirtokh | 35,000 |
+31 to +35 | 7x | Violet | +36 to +40 | 8x | 8 | 9 days | Bromin | Special** |
+36 to +40 | 8x | Copper | +41 to +45 | 9x | 9 | Unknown | Aleteh | Special** |
+41 to +45 | 9x | Silver | +46 to +50 | 10x | 10 | Unknown | Grenshol | Special** |
+46 to +50 | 10x | Gold | Not Further Enchantable |
* Average time per pour. May vary depending upon number of current enchanting projects and skill of wizard.
† Base prices shown. Enchanting potions are generally sold in units of 4 doses, so the price per cycle is 1/4 of the price shown here. See Trading for more information on variations in price. Some enchant potions can also be produced via Alchemy.
** These potions are not publicly available on a regular basis, and have been distributed only by special event merchants.
Higher level potions may always be used for lower level enchanting projects; however this is generally not cost effective, and is usually done only when the wizard has a stockpile of high level potions.
Casting the Enchantment
The second part of the process is casting the spell itself. Once the temper has fully cured, the item is ready to receive the magic. Just like the previous step, the proper preparation is paramount to success.
- To ascertain if the temper is complete, cast Elemental Detection at it.
If you receive a message similar to the following, the item is tempering but not yet cured:
The layers of essence permeating the rosewood runestaff unfold before you to reveal the familiar patterns of a tempering enchanting project, which you recognize as one of your own. It is currently tempering and on the first step of the enchanting process. You recognize the vibrant red aura surrounding it as indicating a weak level of enchantment.
If you receive a message similar to the following, the item is tempered and cured:
The layers of essence permeating the green imflass mail unfold before you to reveal the familiar patterns of a tempering enchanting project, which you recognize as one of your own. It is currently tempered and ready to be enchanted. It is on the fifth step of the enchanting process. You recognize the muted blue aura surrounding it as indicating a strong level of enchantment.
Once this "ready" message is received, the item is ready to be cast upon. (Note that the detection message will read "final" for the final step of each enchantment level, rather than the appropriate numerical value.)
At this point, you should check that you have positively influenced all of the factors within your control. Taking this extra step will help prevent failure that could have been avoided. Check the following section for conditions which may have a positive or negative affect on your success.
Once all factors have been taken into account, you should be ready to cast the enchantment. Simply hold the item in your hand and cast the Enchant Item (925) spell at the item. Expect a significant roundtime for this activity. (Some wizards have reportedly used Haste (506) in order to counteract this effect.)
Success Factors
Positive Factors | Negative Factors |
---|---|
Wizard Base ranks | Less than full health |
Major Elemental ranks | Less than full spirit |
Minor Elemental ranks | Wounds |
Level of enchanter | Scars |
Magic Item Use ranks | Material of the item |
Arcane Symbols ranks | Having creatures present |
Logic, Intuition, Aura | Encumbrance |
Elemental Mana Control ranks | Death's Sting |
Having a familiar in the room | Having a familiar elsewhere |
Earthnode or Workshop |
The precise formula to achieve a successful enchantment is still largely unknown. What is known, is that the level and Wizard Base ranks of the enchanter are primary factors, and that carelessness while going through the motions is the largest factor of failure. The following table lists all known factors (positive or negative), in no particular order.
- There is a minimum 3% failure rate for the final step of any enchant, regardless of the enchanter's stats, skills, level, or the level of the enchantment itself.
- Historically, wizards would overtrain their Wizard Base ranks to achieve more skill at enchanting. In the most recent revision of the spell, benefits from Wizard Base ranks were given diminishing returns.
- The most preventable cause of failure is attempting to cast upon an item whose temper has not yet cured, through sheer carelessness or impatience. This can be easily prevented through the proper and informed use of Elemental Detection (405).
Rewards for your Efforts
Successful enchantments earn experience, and potentially large amounts of silver.
While the enchantment process does not directly reward the wizard in silver, many items are enchanted with the intent of sale. By increasing the enchantment on an item, the wizard has increased its value, sometimes by immense amounts. This is particularly true of major enchantments (above 4x) and enchantments upon unusual items. Armor also tends to be profitable due to the relative lack of NPC shops that sell enchanted armor (particularly the leather-based armors commonly used by most professions), and high prices in the few shops that do. (Low level enchants on weapons and shields are available over-the-counter for the most common types.)
Major enchant projects are exceedingly valuable due to the time and skill which they take to complete, and the restriction of only one major enchant at a time. In some cases, wizards will hire themselves out to provide this service on items already owned by the customer.
A few wizards prefer, instead, to produce large quantities of minor enchant projects (usually bringing items right up to the 4x minor/major cutoff) for sale. While the potential for profit is lower, some enjoy the relative lack of risk to their reputations, since their customers are unaware of failures or delays.
Experience From Enchanting
The experience gained from a successful cast is based on the following formula:
EXP = ( 100 x step of enchant ) - enchanter's level
For example, a level 50 wizard, making the third cast of an enchant would receive 250 experience.
( 100 × 3 ) - 50 = 250 EXP
Failed casts
Unfortunately, not all Enchantments are successful. Failures range from nearly benign to utterly catastrophic, and include in increasing order of severity:
- Improper cast, temper re-set. (Recovery: wait out the new temper cycle, re-cast.)
- Loss of several (where "several" may be "1") temper steps, project still on-going. (Recovery: re-pour the potion, wait out the cycle, re-cast.)
- Loss of all progress, project re-set to lower complete Enchantment (if the item was being taken from 2x to 3x, it is now again a 2x item but fully usable at this time; it is possible to regress to lower than the starting point (2x item going to 3x fails and is set to 1x)). (Recovery: start the entire project over again with the first pour of a tempering potion; if several steps have been lost then the appropriate lower potion is usable.)
- Item becomes cursed (stuck in caster's hand until a Cleric can either Neutralize Curse (309) or Remove Curse (315)), the description is changed to "blackened" (ex. "a blackened breastplate", "some blackened leathers"), and the bonus on the item is typically set to +0 or lower. (Recovery: if desired, start the process again to bring the item first to +0 and then successive steps beyond; the item will need to be either dyed or altered at a merchant in order to have the description changed.) This failure may cause the item to be dropped to the ground; however, when this is the case, the item is still cursed and will become stuck in hand if picked up.
- Item is destroyed in an explosion; flying shards may wound or even kill the casting Wizard and possibly bystanders. There is no recovery from this; the item is gone.
See also
- Enchanting updates (saved post) from 04/24/09
- Enchanting Projects and Tempers (saved post) from
- Enchant spell history (saved post)
External Links
- Wizard Base Spell Circle: Enchant Item, on Play.net
- Official Enchanting Notes
- 405 Reveals for Enchanting
Wizard Profession - edit |
---|
Spell Circles: Wizard Base Spells | Major Elemental Spells | Minor Elemental Spells |
Professional Highlights: Bolt spells | Call Familiar | Enchanting | Charge Item |
Popular Archetypes: Pure Mage | War Mage | Enchanter |